Ref.
Course Title
Duration (Days)
Instructor
Course Type
PE005
Introduction to Process Plant Equipment
5
Mr. Izak Labuschagne
Process & Chemical Engineering
PE010
Oil Movement, Storage and Troubleshooting in Modern Refineries, Marine Terminals and Oil Plants
5
Mr. Mohammad Hamami
Process & Chemical Engineering
PE015
Applied Hydrogenation and Gasification Technology
5
Dr. Emad Mansour
Process & Chemical Engineering
PE020
Process Equipment: FIRED HEATERS, AIR COOLERS, HEAT EXCHANGERS, PIPING, PUMPS, COMPRESSORS , PROCESS VESSELS, FRACTIONATOR COLUMNS, REACTORS and ANCILLARY EQUIPMENT: Selection, Sizing, Applications, Design, Operation, Troubleshooting & Maintenance
5
Mr. Stephen Levette
Process & Chemical Engineering
PE025
Practical Polymer and Polymerization Technology
5
Dr. Lennart Johansson
Process & Chemical Engineering
PE030
Polymer Reaction Engineering
5
Dr. Lennart Johansson
Process & Chemical Engineering
PE040
Chemical Reaction Engineering Application
5
Dr. Emad Mansour
Process & Chemical Engineering
PE045
Solution of Complex Process Problems by using Artificial Neural Networks
5
Mr. Adriaan Van Der Merwe
Process & Chemical Engineering
PE050
Elements of Applied Process Engineering and Practical Technology
5
Mr. Adriaan Van Der Merwe
Process & Chemical Engineering
PE060
Fertilizer Manufacturing Process Technology
5
Mr. Izak Labuschagne
Process & Chemical Engineering
PE055
Process Reactors: OPERATION, TROUBLESHOOTING, START-UP and SHUTDOWN: Hydro-Treating, Catalytic Reforming & Hydro-Cracking
5
Mr. Mohammad Hamami
Process & Chemical Engineering
PE065
Mechanical Behavior of Polymers: Correlation with Structure
5
Dr. Claude Lucchessi
Process & Chemical Engineering
PE070
Advances in Emulsion Polymerization and Latex Technology
5
Dr. Claude Lucchessi
Process & Chemical Engineering
PE080
Plastic Processing Handling
5
Dr. Lennart Johansson
Process & Chemical Engineering
PE090
Poly Olefins Catalyst
5
Dr. Herman Julsing
Process & Chemical Engineering
PE095
Catalyst Material Handling: Loading, Unloading, Oxidation, Reduction and Technique
5
Process & Chemical Engineering
PE100
Chlorination System
5
Process & Chemical Engineering
PE105
Process Plant Rehabilitation, Revamping and De-Bottlenecking
5
Process & Chemical Engineering
PE110
Advanced Process Eng. Designs
5
Mr. Bob Wilson
Process & Chemical Engineering
PE114
Process Plant Troubleshooting and Engineering Problem Solving
5
Mr. Izak Labuschagne
Process & Chemical Engineering
PE115
Process Plant Performance and Efficiency
5
Process & Chemical Engineering
PE120
Catalyst Technology
5
Mr. Bob Wilson
Process & Chemical Engineering
PE125
Catalyst in Refineries
5
Process & Chemical Engineering
PE130
Process Troubleshooting for Operators and Technicians
5
Process & Chemical Engineering
PE135
Catalyst in Petrochemical Plants
5
Process & Chemical Engineering
PE140
Upstream Petroleum Industry Process Engineering
5
Mr. R.G. Bailey Mr. Barry Hayden
Process & Chemical Engineering
PE145
The Art and Science of Industrial Mixing
5
Process & Chemical Engineering
PE150
Process Engineering Problem Solving and Calculations by Programming Spreadsheets
5
Mr. Bob Wilson
Process & Chemical Engineering
PE155
Advanced Mixing Technology Practical Applications
5
Process & Chemical Engineering
PE160
Process Engineering Fundamentals
5
Mr. Deryck Coetzer
Process & Chemical Engineering
PE165
Mixing of Liquids and Complex Materials
5
Process & Chemical Engineering
PE170
Introduction to Surface Facilities
5
Process & Chemical Engineering
PE175
Powder and Bulk Mixing: Process, Applications and Equipment
5
Process & Chemical Engineering
PE180
Process Equipment Application and Efficient Operation: Pressure Vessels & Reactors, Storage Tanks
5
Process & Chemical Engineering
PE185
Pilot Plant Design: Construction and Operation
5
Process & Chemical Engineering
PE190
Multi-Stage Flash Desalination (MSF): Operation, Maintenance, Heat Balance, Performance, Optimization, Start-Up and Troubleshooting
5
Process & Chemical Engineering
PE200
Applied Petroleum Refinery Processing
5
Mr. Stephen Levette
Process & Chemical Engineering
PE205
Fluid Properties and Phase Behavior
5
Process & Chemical Engineering
PE210
Mechanism of Salt Removal
5
Process & Chemical Engineering
PE230
Process Plant Start-up, Commissioning and Troubleshooting
5
Mr. Mohammad Hamami
Process & Chemical Engineering
PE240
Liquid Bulk Cargo Handling: CRUDE OIL and LNG: Storage, Separation, Loading, Unloading, Marine Operations, Dehydration, Desalting, Measurement & Calculations
5
Mr. Mohammad Hamami
Process & Chemical Engineering
PE250
Surface Production Operations: Design of Gas-Handling Systems and Facilities
5
Process & Chemical Engineering
PE270
Limestone Water Treatment
5
Process & Chemical Engineering
PE280
Gas Processing For LNG and LPG Plants
5
Mr. Stephen Levette
Process & Chemical Engineering
PE290
Troubleshooting Refineries and Petrochemical Plants
5
Mr. Gregory James Black
Process & Chemical Engineering
PE300
Gas Conditioning and Processing Technology
5
Dr. Emad Mansour
Process & Chemical Engineering
PE310
Gas Sweetening and Sulphur Recovery
5
Dr. Emad Mansour
Process & Chemical Engineering
PE315
Gas Field Operations: Gas Processing, Hydrates, Dehydration, Sweetening, NGL Recovery, Fractionation, Sulphur Recovery and Handling
5
Mr. Stephen Levette
Process & Chemical Engineering
PE320
NGL Recovery and Fractionation
5
Mr. Stephen Levette
Process & Chemical Engineering
PE325
Petrochemical Process Reactor Control, Operation and Maintenance
5
Dr. Michael Scurrell
Process & Chemical Engineering
PE330
Dehydration and Hydrate Prevention
5
Dr. Emad Mansour
Process & Chemical Engineering
PE335
Blow Molding Technology
5
Process & Chemical Engineering
PE340
Process Simulation using Hysys
5
Mr. Izak Labuschagne
Process & Chemical Engineering
PE350
Hydrocarbon Dewpoint (HCDP) Control
5
Mr. Izak Labuschagne
Process & Chemical Engineering
PE360
Design of Natural Gas Process Equipment
5
Mr. Stephen Levette
Process & Chemical Engineering
PE380
Fired Process Heaters
5
Mr. Stephen Levette
Process & Chemical Engineering
PE390
Distillation Columns: Design, Control and Operation
5
Mr. Mohammad Hamami
Process & Chemical Engineering
PE400
Crude Oil Storage and Management
5
Mr. Mohammad Hamami
Process & Chemical Engineering
PE420
Amine Gas Sweetening and Sulphur Recovery
5
Mr. Mohammad Hamami
Process & Chemical Engineering
PE430
Polymerization and Plastic Materials
5
Dr. Lennart Johansson
Process & Chemical Engineering
PE435
PVC Manufacturing and Process Troubleshooting
5
Process & Chemical Engineering
PE440
Advanced Chemical Engineering Thermodynamics
5
Mr. Adriaan Van Der Merwe
Process & Chemical Engineering
PE445
Glass Fiber Epoxy Piping
5
Process & Chemical Engineering
PE450
Plastic Additives
5
Dr. Lennart Johansson
Process & Chemical Engineering
PE455
GRP Glass Reinforced Plastic
5
Process & Chemical Engineering
PE460
The Science and Technology of PVC
5
Dr. Claude Lucchessi
Process & Chemical Engineering
PE470
Practical Sulfonation and Sulfation Technology
5
Dr. A. Almayahi
Process & Chemical Engineering
PE480
Advanced Distillation Troubleshooting
5
Dr. Claude Lucchessi
Process & Chemical Engineering
PE490
Gasoline and Diesel Fuel Technology
5
Dr. Guillermo Leal
Process & Chemical Engineering
PE495
Gasoline Oxygenates Technology
5
Process & Chemical Engineering
PE500
Fuel Quality (Diesel)
5
Dr. Guillermo Leal
Process & Chemical Engineering
PE510
Fuel Quality (Gasoline)
5
Dr. Guillermo Leal
Process & Chemical Engineering
PE520
Water Treatment for Plant Utilities, Offsites and Cogeneration
5
Dr. Guillermo Leal
Process & Chemical Engineering
PE530
Water Desalination Plant: Operations, Maintenance and Troubleshooting
5
Dr. Guillermo Leal
Process & Chemical Engineering
PE540
Modern Water Desalination Technologies
5
Dr. Guillermo Leal
Process & Chemical Engineering
PE550
Industrial Water Treatment in Refineries and Petrochemical Plants
5
Dr. Guillermo Leal
Process & Chemical Engineering
PE560
Bulk Liquid Storage Tanks
5
Dr. Guillermo Leal
Process & Chemical Engineering
PE570
Process Simulation
5
Dr. Guillermo Leal
Process & Chemical Engineering
PE580
MTBE: Fundamentals, Manufacturing Process, Safety and Environmental Concerns
5
Dr. Lennart Johansson
Process & Chemical Engineering
PE590
Plastic and Rubber Manufacturing & Processes Troubleshooting
5
Dr. Lennart Johansson
Process & Chemical Engineering
PE595
Corrosion of Plastics
5
Process & Chemical Engineering
PE600
Steel Manufacturing and Process Troubleshooting
5
Dr. Lennart Johansson
Process & Chemical Engineering
PE610
Lube Oil Additives
5
Dr. Lennart Johansson
Process & Chemical Engineering
PE615
TAME Manufacturing and Process Troubleshooting
5
Process & Chemical Engineering
PE620
Polyethylene and Polypropylene Manufacturing & Process Troubleshooting
5
Dr. Lennart Johansson
Process & Chemical Engineering
PE630
Urea Manufacturing and Process Troubleshooting
5
Dr. Lennart Johansson
Process & Chemical Engineering
PE640
Troubleshooting Process Operations
5
Dr. Guillermo Leal
Process & Chemical Engineering
PE660
Rules of Thumb for Chemical and Process Engineers
5
Mr. Willem De Beer
Process & Chemical Engineering
PE670
Aluminum Manufacturing and Process Troubleshooting
5
Dr. Lennart Johansson
Process & Chemical Engineering
PE680
Petroleum Refinery Process
5
Dr. Guillermo Leal
Process & Chemical Engineering
PE690
Water Treatment Technology
5
Dr. Roger King
Process & Chemical Engineering
PE700
Introduction to PRO / II
5
Mr. Mohammad Hamami
Process & Chemical Engineering
PE710
Advanced PRO / II
5
Process & Chemical Engineering
PE780
Industrial Membranes Separations
5
Mr. Mohammad Hamami
Process & Chemical Engineering
PE790
Modern Petroleum Refining Processes: Module # 1: Alkylation, Polymerization and Base Aromatics Production Processes
5
Dr. Guillermo Leal
Process & Chemical Engineering
PE800
Modern Petroleum Refining Processes: Module # 2: Catalytic Cracking and Catalytic Reforming
5
Dr. Guillermo Leal
Process & Chemical Engineering
PE810
Modern Petroleum Refining Processes: Module # 3: Dehydrogenation, Hydrogen Production, Hydrocracking and Hydrotreating
5
Mr. Mohammad Hamami
Process & Chemical Engineering
PE820
Modern Petroleum Refining Processes: Module # 4: Isomerization and Separation Processes
5
Dr. Guillermo Leal
Process & Chemical Engineering
PE830
Modern Petroleum Refining Processes: Module # 5: Sulfur Compound Extraction and Sweetening
5
Dr. Guillermo Leal
Process & Chemical Engineering
PE840
Modern Petroleum Refining Processes: Module # 6: Visbreaking, Coking, Oxygenates Production, Hydrogen Processing and Gas-to-Liquids Technologies
5
Dr. Guillermo Leal
Process & Chemical Engineering
PE850
Modern Gas Production Operations
5
Mr. Stephen Levette
Process & Chemical Engineering
PE860
Modern Oil Production Operations
5
Mr. Stephen Levette
Process & Chemical Engineering
PE870
Hydrocarbon Production Operations
5
Process & Chemical Engineering
PE880
Refining Process and Petroleum Products Program
5
Process & Chemical Engineering
PE900
Troubleshooting Refinery Operation
5
Process & Chemical Engineering
PE920
Oil and Gas Field Start-up & Troubleshooting
5
Process & Chemical Engineering
PE935
Process Plants Shutdown and TurnArounds
5
Mr. Stephen Levette
Process & Chemical Engineering
PE940
Crude Oil Desalting Process (Mechanism and Limitation)
5
Mr. Mohammad Hamami
Process & Chemical Engineering
PE950
Cryogenic Pumping
5
Mr. Henry A. Smith III
Process & Chemical Engineering
PE970
Surface Production Operations (Oil and Gas)
5
Process & Chemical Engineering
PE980
Safety in Process Design
5
Process & Chemical Engineering
PE990
Surface Production and Operations
5
Mr. Mohammad Hamami
Process & Chemical Engineering
ME002
Blower and Fan Technology
5
Mechanical & Utility Engineering
ME004
Troubleshooting Piping and Pipe Support Systems
5
Dr. Charles Becht
Mechanical & Utility Engineering
ME010
Boiler Water Treatment Technology
5
Mr. Ken Heselton
Mechanical & Utility Engineering
ME015
Centrifugal Compressor and Steam Turbines - DESIGN, OPERATION & MAINTENANCE
5
Mr. Fred Geitner
Mechanical & Utility Engineering
ME018
International Boiler Inspector -IBI {Training and Certification}
5
Mr. Ken Donithan
Mechanical & Utility Engineering
ME020
Boiler Operation, Maintenance and Water Treatment Technology (ISBI Licensing Preparation Course)
5
Mr. Ken Donithan
Mechanical & Utility Engineering
ME022
Gas Turbine Technology: Design, Operation, Control, Troubleshooting and Maintenance
5
Mr. Fred Geitner
Mechanical & Utility Engineering
ME026
Centrifugal Pumps and Troubleshooting
5
Dr John L Sproston
Mechanical & Utility Engineering
ME030
Gas Turbines: Selection, Applications, Operation, Economics, Diagnostics, Troubleshooting, and Maintenance
5
Professor Philip Kiameh
Mechanical & Utility Engineering
ME035
Analytical Troubleshooting in Process Machinery and Pressure Vessels
5
Mr. Markus Timusk
Mechanical & Utility Engineering
ME040
Gas Turbine Operations
5
Mechanical & Utility Engineering
ME045
Design, Analysis, and Fabrication of Pressure Vessels (ASME Code Section VIII, Division 1)
5
Mr. Kam Mokhtarian
Mechanical & Utility Engineering
ME046
Design, Analysis, and Fabrication of Pressure Vessels (ASME Code Section VIII, Division 2)
5
Mr. Kam Mokhtarian
Mechanical & Utility Engineering
ME047
Pressure Vessel Design, Fabrication, Inspection, Flaw Evaluation and Repair (ASME Section VIII, API-510 and API 579 standards)
5
Mr. Kam Mokhtarian
Mechanical & Utility Engineering
ME050
Pressure Equipment: INSPECTION, MAINTENANCE, REPAIR, FLAW EVALUATION and FFS: ASME Post Construction Documents, API 510, API 579 & National Board Inspection Code
5
Mr. Kam Mokhtarian
Mechanical & Utility Engineering
ME055
Pipeline Rules of Thumb
5
Mr. George Antaki
Mechanical & Utility Engineering
ME060
Dry Gas Seal Maintenance
5
Mechanical & Utility Engineering
ME062
Heat Exchanger Design, Performance and Operation
5
Dr John L Sproston
Mechanical & Utility Engineering
ME065
Humidification and Water Cooling
5
Dr John L Sproston
Mechanical & Utility Engineering
ME070
Overview of API Standards and Recommended Practices
5
Dr John L Sproston
Mechanical & Utility Engineering
ME075
CONTROL VALVES AND ACTUATORS: Selection, Calculations, Sizing, Applications, Operation, Diagnostic Testing, Troubleshooting, and Maintenance
5
Mr. Norman Grabham
Mechanical & Utility Engineering
ME080
Practical Hydraulic Systems: Operation and Troubleshooting
5
Mr. Barry Catanach
Mechanical & Utility Engineering
ME090
Steam Boilers Operation, Maintenance and Control Systems
5
Mr. David House
Mechanical & Utility Engineering
ME100
Practical Valve Technology: Selection, Installation, Upgrading, Inspection and Troubleshooting
5
Dr. Jerry Lyons
Mechanical & Utility Engineering
ME110
Machinery Bearing, Lubrication and Reliability (Tribology)
5
Mechanical & Utility Engineering
ME115
Bolted Flange Design and Stress Analysis
5
Mr. Fred Geitner
Mechanical & Utility Engineering
ME120
Safety Relief Valve Inspection, Maintenance, Operation, Troubleshooting and Repair
5
Mr. Thomas Tarbay
Mechanical & Utility Engineering
ME125
Super Alloy Gas Turbines
5
Mr. Fred Gietner
Mechanical & Utility Engineering
ME130
Auxiliary Steam Turbines: Mechanical Maintenance
5
Mechanical & Utility Engineering
ME135
Optimum Design and Effective Maintenance of Pressure Equipment
5
Mr. Kam Mokhtarian
Mechanical & Utility Engineering
ME136
Atmospheric Storage Tanks
5
Jack Mooney
Mechanical & Utility Engineering
ME138
Application of Standards in Boiler, Pressure Vessel and Piping Codes
5
Mr. Phil Elenberger
Mechanical & Utility Engineering
ME140
Practical Mechanical Seals: Selection, Maintenance and Troubleshooting
5
Mr. Keith Balchin
Mechanical & Utility Engineering
ME145
ASME B31.1 Power Piping
5
Mr. Bob Wilson
Mechanical & Utility Engineering
ME150
Advanced HVAC
5
Mechanical & Utility Engineering
ME160
Modern Heating, Ventilation and Airconditioning (HVAC) Systems
5
Mr. Bernard De Cruz
Mechanical & Utility Engineering
ME170
Industrial Equipment: COMPRESSORS, PUMPS, MOTORS, AND VARIABLE-SPEED DRIVES: Selection, Sizing, Applications, Operation, Diagnostic Testing, Troubleshooting, and Maintenance
5
Dr. Philip Kiameh
Mechanical & Utility Engineering
ME180
Boiler and Steam System Management
5
Mr. Ken Donithan
Mechanical & Utility Engineering
ME190
Mechanical Equipment: Control Valves, Actuators, and Pumps: Selection, Calculations, Sizing, Applications, Operation, Diagnostic Testing, Troubleshooting, and Maintenance
5
Dr. Philip Kiameh
Mechanical & Utility Engineering
ME200
Bearing Installation, Maintenance, Troubleshooting and Failure Analysis
5
Dr. Philip Kiameh
Mechanical & Utility Engineering
ME210
Mechanical Engineering for Non-Mechanical Engineers
5
Mr. Robert Kean
Mechanical & Utility Engineering
ME220
Practical Pneumatic Systems: Design, Operation, Control, Maintenance and Troubleshooting
5
Mr. Bernard De Cruz
Mechanical & Utility Engineering
ME230
Gear Boxes: Selection, Inspection, Maintenance, Troubleshooting and Repair
5
Mr. Robert Kean
Mechanical & Utility Engineering
ME240
Advanced Valve Technology: Design, Selection, Installation, Applications, Sizing, Inspection, Maintenance andTroubleshooting
5
(1) Mr. Thomas Tarbay (2) Mr. Gordon Duff
Mechanical & Utility Engineering
ME250
Blowers and Turbochargers
5
Mr. Keith Balchin
Mechanical & Utility Engineering
ME260
Fundamental of Mechanical Maintenance
5
Mechanical & Utility Engineering
ME270
Mechanical Maintenance I
5
Mechanical & Utility Engineering
ME275
Steam Trapping and Control
5
Mechanical & Utility Engineering
ME280
Mechanical Maintenance II
5
Mechanical & Utility Engineering
ME290
Design Ventilation Systems
5
Mr. Fred Geitner
Mechanical & Utility Engineering
ME300
Mechanical Alignment / Shaft Alignment
5
Mechanical & Utility Engineering
ME310
Steam Turbine Maintenance
5
Mr. William Hadley
Mechanical & Utility Engineering
ME320
Advanced Steam Turbine Maintenance for Engineers
5
Mr. Fred Geitner
Mechanical & Utility Engineering
ME330
Gas and Steam Turbines
5
Mechanical & Utility Engineering
ME335
Gas Turbines Performance, Maintenance and Testing
5
Mechanical & Utility Engineering
ME340
Flare and Pressure Relief Systems in Process Plant
5
Mechanical & Utility Engineering
ME350
GE Turbine Operations and Inspection
5
Mechanical & Utility Engineering
ME370
Practical Boiler Plant Operation and management for Engineers & Technicians
5
Dr. Glennon Maples
Mechanical & Utility Engineering
ME375
Practical Pump Technology: Selection, Operation and Maintenance
5
Mr. Fred Geitner
Mechanical & Utility Engineering
ME380
ASME B31.3, Process Piping Design, Construction and Mechanical Integrity (ASME B31.3 & API570)
5
Dr. Charles Becht
Mechanical & Utility Engineering
ME385
Piping Vibration Analysis and Practical Engineering Solutions in Process Plants
5
Dr. Charles Becht
Mechanical & Utility Engineering
ME393
Troubleshooting Piping and Pipe Support Systems
5
Dr. Charless Becht
Mechanical & Utility Engineering
ME395
Applied Heat Transfer Engineering
5
Dr. John Sproston
Mechanical & Utility Engineering
ME396
Selection, Installation and Use of Compressed Air Services
5
Dr. John Sproston
Mechanical & Utility Engineering
ME397
Pump and Valve Selection for Optimum System Performance
5
Dr. John Sproston
Mechanical & Utility Engineering
ME398
Pumps, Compressors, Turbines and Troubleshooting
5
Dr John L Sproston
Mechanical & Utility Engineering
ME401
Utilities and Energy Systems Design & Performance in Refineries & Petrochemical Plants
5
Mr. Nabil Al Khirdaji
Mechanical & Utility Engineering
ME420
Turbo Expander: Operation, Performance, Maintenance and Troubleshooting
5
Mr. Fred Geitner
Mechanical & Utility Engineering
ME430
Advanced Technology of Pipeline Design, Construction and Mechanical Integrity
5
Dr. Fill Maseour
Mechanical & Utility Engineering
ME435
Pressure Relief System Design For ASME Section I, IV and VIII Applications
5
Dr. Tom Smyllie
Mechanical & Utility Engineering
ME440
Hydraulic and Pneumatic Maintenance & Troubleshooting
5
Dr. Micheal King
Mechanical & Utility Engineering
ME450
Practical Pump Technology
5
Dr. Fill Maseour
Mechanical & Utility Engineering
ME460
Mechanical Codes
5
Mechanical & Utility Engineering
ME470
ASME B31.4-B31.8: Oil and Gas Pipeline Code: Design, Fabrication, Inspection & Repair
5
Mechanical & Utility Engineering
ME480
ASME Post Construction COD (PCC): Inspection, Planning, Fitness-For-Service and Repair for Vessels, Tanks & Pipings
5
Mechanical & Utility Engineering
ME490
ASME Boiler and Pressure Vessel Code:
Section IX, Welding & Brazing Qualifications
5
Dr. Norman Kellock
Mechanical & Utility Engineering
ME500
Advanced Air Conditioning and Refrigerating Technology
5
Mechanical & Utility Engineering
ME510
Maintenance and Fault Finding of Central Air Conditioning Units and Chillers
5
Mechanical & Utility Engineering
ME520
Design and Analysis of Pipe Support System
5
Mr. Bob Wilson
Mechanical & Utility Engineering
ME530
HVAC Direct Digital Control (DDC): Practical Application and Design
5
Mechanical & Utility Engineering
ME540
Heat Balance in MSF Plant
5
Dr. Nidal Hilal
Mechanical & Utility Engineering
ME550
Heat Treatment
5
Mechanical & Utility Engineering
ME560
Pumps, Valves and Diesel Engine Maintenance
5
Mechanical & Utility Engineering
ME565
Machinery Alignment and Balancing
5
Mechanical & Utility Engineering
ME570
Advanced Pressure Vessel Design
5
Mr. Kamran Mokhtarian
Mechanical & Utility Engineering
ME580
Fluid Mechanics
5
Mr. Bob Wilson
Mechanical & Utility Engineering
ME585
Indoor Air Quality (IAQ) Measurement, Analysis and Air Balancing
5
Mechanical & Utility Engineering
ME590
Diesel Engine Maintenance
5
Mr. Alain Meesschaert
Mechanical & Utility Engineering
ME595
Tank and Tank Farms: Design, Operation, Measurement, Inspection & Maintenance
5
Mechanical & Utility Engineering
ME600
ASME B31.8 -Gas Piping Course
5
Mr. Bob Wilson
Mechanical & Utility Engineering
ME620
Heat Exchanger Inspection, Maintenance and Operation
5
Mr. Gordon Stewart
Mechanical & Utility Engineering
ME630
The Layout of Piping Systems and Process Equipment
5
Mr. Robert Wilson
Mechanical & Utility Engineering
ME640
Lubrication, Wear and Friction
5
Mr. Barry Catanach
Mechanical & Utility Engineering
ME645
Water System Networking and Pumping Stations
5
Mechanical & Utility Engineering
ME650
Overview of API and ASME Standards Applicable to Process Industry
5
Mechanical & Utility Engineering
ME660
Centrifugal Compressor and Pump Technology
5
Mechanical & Utility Engineering
ME680
Operation and Maintenance of Hydraulically Operated Equipment
5
Mechanical & Utility Engineering
ME725
Design of Bolted Flange Joints
5
Mr. John Dimberson
Mechanical & Utility Engineering
ME750
Practical Boiler Plant: Operations, Maintenance and Troubleshooting
5
Mr. Norman Grabham
Mechanical & Utility Engineering
ME765
Oil and Gas Flows in Pipes - Engineering Calculations and Practice
5
Dr. John Sproston
Mechanical & Utility Engineering
ME770
Acoustics and Noise Control
5
Mechanical & Utility Engineering
ME780
Reciprocating Compressors
5
Dr. John Sproston
Mechanical & Utility Engineering
ME790
Flang Design in the Hydrocarbon Industry
5
Mr. Keith Balchin
Mechanical & Utility Engineering
ME800
Certified Gas Turbines Professional
5
Dr. John Sproston
Mechanical & Utility Engineering
ME810
Vibration Correction and Rotating Equipments Alignment Techniques
5
Mr. Fred Geitner & Mr. William Haddley
Mechanical & Utility Engineering
ME820
Machinery For Process Industry (Operation, Maintenance and Inspection of Rotating Machinery)
5
Mr. Fred Geitner
Mechanical & Utility Engineering
ME850
Machine Workshop Management
5
Mechanical & Utility Engineering
ME880
Pipeline and Piping Inspection, Maintenance, Repair and Integrity (ASME B31 and API 579 Standards)
5
Mr. George Antaki
Mechanical & Utility Engineering
ME882
Pipeline and Piping Maintenance and Rehabilitation
5
Mr. George Antaki
Mechanical & Utility Engineering
ME885
Pipeline and Piping Inspection, Maintenance and Integrity Assessment (ASME B31 & API 579 Standards)
5
Mr. George Antaki
Mechanical & Utility Engineering
ME890
ASME B31 Design and Integrity Stress Analysis of Piping Systems and Pipelines
5
Mr. George Antaki
Mechanical & Utility Engineering
ME895
Pipeline Integrity Assessment - Practical Aspects
5
Mr. Robert Smyth
Mechanical & Utility Engineering
ME896
API RP-1111: Design, Construction, Operation, and Maintenance of Off-shore Hydrocarbon Pipeline and Risers
5
Dr. Charles Manditt & Dr. Torgeir Moan
Mechanical & Utility Engineering
ME900
Pipeline Pigging: Technical and Operational Aspects
5
Mr. Glenn Cameron and Mr. Carey Arnett
Mechanical & Utility Engineering
ME905
Piping Stress Analysis using CAESAR II
5
Mechanical & Utility Engineering
ME910
Fatigue and Dynamic response of sub-sea Pipelines
5
Mr. George Antaki
Mechanical & Utility Engineering
ME930
Fundamentals of Thermodynamics
5
Prof. Keith Balchin
Mechanical & Utility Engineering
ME940
Operation of Crude Desalter Equipments, Fired Heaters, Air Coolers, Heat Exchangers, Pumps, Compressors, Proces Vessels and Valves
5
Mechanical & Utility Engineering
ME960
Combustion Techniques in Furnaces, Boilers and Unit Efficiency
5
Prof. Keith Balchin
Mechanical & Utility Engineering
ME970
Commissioning and Start-up of Boilers
5
Prof. Keith Balchin
Mechanical & Utility Engineering
EE006
Switchgear and Control Applications for Power Plants
5
Mr. Mark Lautenschlager
Electrical & Power Engineering
EE007
Transformer Operation, Maintenance and Testing
5
Dr Jan De Kock & Mr. Clifford Tisser
Electrical & Power Engineering
EE010
Troubleshooting of Electrical Equipment and Control Systems
5
Dr. Jan Der Merwe
Electrical & Power Engineering
EE020
Power Plant Engineering
5
Mr. Carlos Monterrosa
Electrical & Power Engineering
EE025
Power Plant Start-up, Commissioning and Troubleshooting
5
Electrical & Power Engineering
EE030
Safe Operation of Marine and Offshore Electrical Power Systems
5
Dr. Jan De Kock
Electrical & Power Engineering
EE040
Electrical Maintenance, Testing, Inspection and Risk Assessment
5
Dr. John Sproston
Electrical & Power Engineering
EE045
Operations and Maintenance of Large Turbo Generators
5
Mr. Jon Michaila
Electrical & Power Engineering
EE050
Electric Power Substation Engineering
5
Dr. Jan De Merwe
Electrical & Power Engineering
EE055
Power Generation Operation and Control
5
Mr. Carlos Monterossa
Electrical & Power Engineering
EE060
LV/MV/HV Circuit Breakers (Switchgear): Inspection, Maintenance, Design, Repair and Troubleshooting
5
Dr. Jerry Walker
Electrical & Power Engineering
EE065
High Voltage Circuit Breaker Inspection, Maintenance and Repair
5
Dr. Jerry Walker
Electrical & Power Engineering
EE070
Power Plant Troubleshooting and Engineering Problem-Solving
5
Electrical & Power Engineering
EE075
Structured Cabling
5
Dr. Philip Kiameh
Electrical & Power Engineering
EE080
Electrical Power Distribution
5
Mr. William Mullany
Electrical & Power Engineering
EE085
Power Systems Control and Stability
5
Mr. William Mullany
Electrical & Power Engineering
EE090
Economy Dispatch of Power Plants
5
Mr. William Mullany
Electrical & Power Engineering
EE100
Electrical Power Systems Quality and Troubleshooting
5
Dr. Jerry Walker
Electrical & Power Engineering
EE110
Switch Board
5
Mr. Mohamed Elweshahy
Electrical & Power Engineering
EE120
Power Generation: GAS TURBINES, STEAM POWER PLANTS, CO-GENERATION, AND COMBINED CYCLE PLANTS - Selection, Applications, Operation, Maintenance, and Economics
5
Dr. Philip Kiameh
Electrical & Power Engineering
EE125
Electrical Generators: Selection, Applications, Operation, Protective Systems, Diagnostic Testing and Maintenance
5
Mr. Roger Daniel
Electrical & Power Engineering
EE130
Maintenance and Troubleshooting of UPS Systems (Uninterrupted Power Supply) and Battery Power Supplies
5
Dr. Philip Kiameh
Electrical & Power Engineering
EE135
Motors and Variable Speed Drives: Selection, Applications, Operation, Diagnostic Testing, Protection, Control, Troubleshooting & Maintenance
5
Dr. Philip Kiameh
Electrical & Power Engineering
EE140
Motors, Variable Speed Drives and Generators
5
Dr. Philip Kiameh
Electrical & Power Engineering
EE150
Electrical Metering Applications, Maintenance and New Technologies
5
Dr. Jan De Kock
Electrical & Power Engineering
EE160
Maintaining and Troubleshooting Electrical Equipment
5
Electrical & Power Engineering
EE170
Generator Excitation Systems: Design, Commissioning, Operation, Maintenance, Performance Analysis, Testing, Tuning, Repair and Troubleshooting
5
Dr. Jan De Merwe
Electrical & Power Engineering
EE175
Basic Electricity
5
Dr. Jan De Kock
Electrical & Power Engineering
EE190
The Economic Dispatch Program: Concepts and Sothutin Methods
5
Mr. Mark Lautenschlager
Electrical & Power Engineering
EE200
Practical Troubleshooting of Electrical Equipment and Control Circuits
5
Mr. Jon Mihiala
Electrical & Power Engineering
EE220
Power Distribution and Power Factor Correction
5
Dr. Steve Kennedy
Electrical & Power Engineering
EE230
Safe Operation and Maintenance of Circuit Breakers and Switchgears
5
Mr. Clifford Tisser
Electrical & Power Engineering
EE240
Fault Analysis in Electrical Network
5
Electrical & Power Engineering
EE250
Electric Distribution System Equipment Preventive Maintenance (EPM) and Engineering Principles
5
Mr. Eric Carter
Electrical & Power Engineering
EE260
Power System Blackouts (Causes and Preventive Measures)
5
Electrical & Power Engineering
EE270
HV Equipment, Motors and Alternators
5
Dr Jan De Kock
Electrical & Power Engineering
EE275
Power Systems Protection Technology (Faults, Causes,Detection and Remedies)
5
Dr. Jerry Walker
Electrical & Power Engineering
EE280
Troubleshooting, Maintenance and Protection of AC Electrical Motors and Drives
5
Dr. Mike Cole
Electrical & Power Engineering
EE290
Modern Electric Power Systems: Generation, Transformation, Transmission, Distribution, Substations Utilization: Design, Modeling, Analysis, Planning, Monitoring, Control, Maintenance and Troubleshooting
5
Mr. Sarel Pelser
Electrical & Power Engineering
EE300
Practical Variable Speed Drives (VSD's) For Instrumentation And Control Systems
5
Dr. Mike Cole
Electrical & Power Engineering
EE310
High Integrity Isolation System IEC 61508 (HIPPS)
5
Mr. Mark Lautenschlager
Electrical & Power Engineering
EE320
Electrical Faults, Causes, Detection and Remedies
5
Electrical & Power Engineering
EE325
Electrical Faults and Relay Protection
5
Electrical & Power Engineering
EE330
Electrical Drawing and Interlocking Circuit
5
Electrical & Power Engineering
EE340
Power and Distribution Transformer Selection and Application
5
Dr. Jerry Walker
Electrical & Power Engineering
EE370
High Voltage Phenomena on Power Systems
5
Mr. Mike Southwoold
Electrical & Power Engineering
EE380
Advanced HV and EHV Switching
5
Mr. Jon Mihiala
Electrical & Power Engineering
EE390
Power Factor Correction
5
Mr. Jon Mihiala
Electrical & Power Engineering
EE400
Commissioning of HV Electrical System
5
Mr. Chiras Neophytis
Electrical & Power Engineering
EE410
Power Optimization of Energy Management System in Modern Power Generation Industry
5
Dr. Neophytos Chiras
Electrical & Power Engineering
EE415
Energy Optimization in Process Plants
5
Electrical & Power Engineering
EE430
Quality of Electrical Supply
5
Dr. Neophytos Chiras
Electrical & Power Engineering
EE450
Advanced Quality of Electrical Supply
5
Mr. Mike Southwoold Mr. Jerry Walker
Electrical & Power Engineering
EE460
Electrical Equipment Inspection
5
Electrical & Power Engineering
EE470
Electrical Diagrams
5
Electrical & Power Engineering
EE490
Selection of Cable Type for Petrochemical Process and Environment
5
Mr. Tom Hinderson
Electrical & Power Engineering
EE500
Advanced Lighting Design and Application
5
Electrical & Power Engineering
EE510
Operations of Interconnected Power Systems through AC and DC Converter
5
Electrical & Power Engineering
EE520
Electrical Control System
5
Electrical & Power Engineering
EE530
Electrical Troubleshooting Techniques O.H.L. (Distribution)
5
Electrical & Power Engineering
EE540
Load Forecasting and System Upgrade Distribution
5
Electrical & Power Engineering
EE550
National Electrical Codes
5
Electrical & Power Engineering
EE560
Capacitors in Distribution Systems
5
Electrical & Power Engineering
EE570
Power Factor Protection Technology
5
Electrical & Power Engineering
EE580
Power System Capacitors
5
Electrical & Power Engineering
EE600
Power System Grounding
5
Electrical & Power Engineering
EE660
Practical Earthing, Bonding, Lightning and Surge Protection of Electrical and Electronic Systems & Equipment
5
Dr. Jan De Kock
Electrical & Power Engineering
EE670
Practical Electrical Wiring Standards - IEE BS7671 - 2001 Edition
5
Mr. William Mullany
Electrical & Power Engineering
EE700
Electrical Equipment and Control System
5
Mr. William Mullany
Electrical & Power Engineering
EE710
Electrical Maintenance and Troubleshooting
5
Mr. Jerry Wood
Electrical & Power Engineering
EE750
Power Plant Troubleshooting and Maintenance
5
Electrical & Power Engineering
EE760
Combined Cycle System
5
Mr. Jerry Wood
Electrical & Power Engineering
EE770
Practical High Voltage Cable Jointing and Termination
5
Dr. Philip Kiameh
Electrical & Power Engineering
EE776
Electrical Equipment: TRANSFORMERS, INVERTERS, RECTIFIERS, UNINTERRUPTABLE POWER SYSTEMS, GENERATORS, CIRCUIT BREAKERS and FUSES: Selection, Applications, Operation, Diagnostic Testing, Troubleshooting & Maintenance (Basic Electricity)
5
Mr. Mike Southwood
Electrical & Power Engineering
EE780
Modern Power Distribution Systems for Utilities
5
Mr. Mike Southwood
Electrical & Power Engineering
EE800
Generators: Operations, Maintenance, Control, Testing and Troubleshooting
5
Mr. Mike Southwood
Electrical & Power Engineering
EE810
Electrical Distribution Network
5
Mike Southwood
Electrical & Power Engineering
EE820
Modern Power System Protective Relaying
5
Dr. Jan Der Merwe
Electrical & Power Engineering
EE830
Fundamentals of Electrical Transient Analysis Program (ETAP)
5
Mr. Jerry Walker
Electrical & Power Engineering
EE840
Practical High Voltage Safety Operating Procedures for Engineers and Technicians
5
Mr. Jerry Walker
Electrical & Power Engineering
EE850
Basic Electrical and Instrumentation
5
Electrical & Power Engineering
EE870
Electrical Engineering for Non- Electrical Engineers
5
Mr. Carlos Monterrosa
Electrical & Power Engineering
EE880
Practical Motor Protection, Testing, Control and Maintenance
5
Mr. Cliff Tisser
Electrical & Power Engineering
EE890
Utilities and Energy Systems Design & Performance in Refineries & Petrochemical Plants
5
Mr. Jan de Kock Mr. Cliff Tisser
Electrical & Power Engineering
EE910
High Voltage Transformers: Operations, Maintenance and Testing
5
Dr. Jan de Kock
Electrical & Power Engineering
EE915
High Voltage Motors: Operations, Maintenance and Troubleshooting
6
Dr. Jan de Kock
Electrical & Power Engineering
EE930
Generators Maintenance
5
Dr. Jan de Kock
Electrical & Power Engineering
EE940
Advanced Generator Maintenance
5
Dr. Jan de Kock
Electrical & Power Engineering
EE950
Heat Recovery Steam Generating (HRSG) Equipment
5
Dr. Jan de Kock
Electrical & Power Engineering
EE960
Electrical Demand Side Management (DSM)
5
Dr. Jan de Kock
Electrical & Power Engineering
EE970
Electrical System Restoration, Methodologies and Implementation Strategies
5
Dr. Jan de Kock
Electrical & Power Engineering
EE980
Power Plant Performance and Efficiency
5
Electrical & Power Engineering
IE010
Practical Fiber-Optics Technology
5
Mr. Tom Neillings
Instrumentations, Control & Telecommunications Engineering
IE020
Practical Industrial Data Communications and Telecommunications
5
Mr. Peter Diamandis
Instrumentations, Control & Telecommunications Engineering
IE030
Industrial Instrumentation and Modern Control Systems (Process Control & Instrumentation)
5
Mr. Gordon Duff
Instrumentations, Control & Telecommunications Engineering
IE040
Process Control and Instrumentation
5
Dr. John L Sproston
Instrumentations, Control & Telecommunications Engineering
IE050
Distributed Control Systems (DCS) Fundamentals, Applications and troubleshooting
5
Mr. Andrew Keith Oliver & Mr. Waleed Sarwani
Instrumentations, Control & Telecommunications Engineering
IE060
Introduction to Control Systems in Petrochemical Industry (SCADA/PLC/DCS)
5
Mr. Keith Oliver & Mr. Waleed Sarwani
Instrumentations, Control & Telecommunications Engineering
IE070
Practical Fundamentals of OPC (OLE for Process Control)
5
Mr. Peter Diamandis
Instrumentations, Control & Telecommunications Engineering
IE080
Practical Fieldbus for Process Control: Engineering, Configuration, Installation, Commissioning, Troubleshooting, Operation and Maintenance
5
Mr. Peter Diamandis
Instrumentations, Control & Telecommunications Engineering
IE090
Practical Programmable Logic Controllers (PLC's) For Automation And Process Control
5
Mr. Sarel Pelser
Instrumentations, Control & Telecommunications Engineering
IE100
Practical Fieldbus Foundation Technology
5
Mr. Peter Diamandis
Instrumentations, Control & Telecommunications Engineering
IE110
Boiler Control and Instrumentation
5
Mr. Thomas Fieldsmann
Instrumentations, Control & Telecommunications Engineering
IE120
Installation, Calibration and Maintenance of Electronic Instruments
5
Dr. Mike Cole
Instrumentations, Control & Telecommunications Engineering
IE130
Integrated Electro-Optic Devices and Systems
5
Mr. Tom Neillings
Instrumentations, Control & Telecommunications Engineering
IE140
Advanced Process Control (APC) Technology
5
Dr. Jerry Walker
Instrumentations, Control & Telecommunications Engineering
IE150
Modern Distributed Control Systems (DCS) - Practical Applications
5
Mr. Eric Carter
Instrumentations, Control & Telecommunications Engineering
IE160
Modern Data Communications in Industry
5
Mr. Mike Southwoold
Instrumentations, Control & Telecommunications Engineering
IE170
Electrical Tensional Speed Control System
5
Mr. Mike Southwoold
Instrumentations, Control & Telecommunications Engineering
IE180
Practical Electrical Network Automation and Communication Systems
5
Mr. Paul Nicolaidis
Instrumentations, Control & Telecommunications Engineering
IE190
Programmable Logic Controllers (PLC) and SCADA System
5
Mr. John Michaila
Instrumentations, Control & Telecommunications Engineering
IE200
Synchronous Digital Hierarchy (SDH) and Dense Wavelength Division Multiplexing (DWDM)
5
Dr. Stanly Soures
Instrumentations, Control & Telecommunications Engineering
IE210
AC Electrical Motor Control System
5
Mr. Jerry Walker
Instrumentations, Control & Telecommunications Engineering
IE220
Triconex Maintenance
5
Dr. Jan Der Merwe
Instrumentations, Control & Telecommunications Engineering
IE230
Field Instruments
5
Mr. Henk Kuiper
Instrumentations, Control & Telecommunications Engineering
IE240
Standards of Instrumentation
5
Mr. John Michaila
Instrumentations, Control & Telecommunications Engineering
IE250
Liquid and Gas Flowmetering
5
Dr John L Sproston
Instrumentations, Control & Telecommunications Engineering
IE270
Control Valve Technology and Maintenance
5
Dr. John L Sproston
Instrumentations, Control & Telecommunications Engineering
IE280
Multiphase Flowmetering
5
Mr. Keith Balchin
Instrumentations, Control & Telecommunications Engineering
IE290
Pneumatic Electronic Control Systems
5
Mr. Barry Catanach
Instrumentations, Control & Telecommunications Engineering
IE300
Flow Measurement Techniques
5
Dr. John L Sproston
Instrumentations, Control & Telecommunications Engineering
IE310
Process Controller Tuning
5
Mr. Mohammad Hamami
Instrumentations, Control & Telecommunications Engineering
IE320
Statistical Process Control (SPC)
5
Professor Khalid Hamdy
Instrumentations, Control & Telecommunications Engineering
IE330
Practical Safety Instrumentation and Emergency Shutdown Systems for Process Industries
5
Dr. John L Sproston
Instrumentations, Control & Telecommunications Engineering
IE340
Custody Measurement and Loss Control For Liquid Petroleum Products: Policies, Procedures & Latest Technologies
5
Fahad Al-Othman
Instrumentations, Control & Telecommunications Engineering
IE350
Safety Integrity Level (SIL) Determination and Verification
5
Dr. Angela E. Summers
Instrumentations, Control & Telecommunications Engineering
IE360
Modern Safety Instrumented Systems (SIS) and Emergency Shutdown Systems in Process Industry (IEC 61511 & IEC 61508)
5
Dr. Angela E. Summers
Instrumentations, Control & Telecommunications Engineering
IE370
Ultrasonic Flowmetering for Gas Application
5
Instrumentations, Control & Telecommunications Engineering
IE380
Industrial Electronics Theory and Applications
5
Instrumentations, Control & Telecommunications Engineering
IE390
Testing, Commissioning and Start-Up of Electrical & Control System
5
Instrumentations, Control & Telecommunications Engineering
IE400
Ultrasonic Flowmetering for Liquid Application
5
Instrumentations, Control & Telecommunications Engineering
IE410
Turbine and Compressor Controls
5
Instrumentations, Control & Telecommunications Engineering
IE420
Allen Bradley: SLC 5
5
Instrumentations, Control & Telecommunications Engineering
IE430
Allen Bradley: PLC 5 - RS Logic 500
5
Instrumentations, Control & Telecommunications Engineering
IE440
Allen Bradley: SLC 5 - RS Logic 500
5
Instrumentations, Control & Telecommunications Engineering
IE450
Allen Bradley: Control Net RS Logic 500
5
Instrumentations, Control & Telecommunications Engineering
IE460
Allen Bradley: RS View
5
Instrumentations, Control & Telecommunications Engineering
IE470
SCADA Systems: Siemens SIMATIC and WinCC
5
Instrumentations, Control & Telecommunications Engineering
IE480
TB5000 Ruston Turbine Control System
5
Instrumentations, Control & Telecommunications Engineering
IE490
Allen Bradley PLC (Basic)
5
Instrumentations, Control & Telecommunications Engineering
IE500
Allen Bradley PLC (Intermediate)
5
Instrumentations, Control & Telecommunications Engineering
IE510
Validation of PLC, SCADA and DCS Automated Process Control
5
Instrumentations, Control & Telecommunications Engineering
IE520
Principles of DCS Alarm Management
5
Instrumentations, Control & Telecommunications Engineering
IE530
SERCEL Instrument and Software Quality Control Facilities & Analysis
5
Instrumentations, Control & Telecommunications Engineering
IE540
Power Plant Control and Instrumentation
5
Instrumentations, Control & Telecommunications Engineering
IE550
Anti Surge Controller
5
Instrumentations, Control & Telecommunications Engineering
IE560
Practical SCADA and Telemetry Systems for Industry
5
Instrumentations, Control & Telecommunications Engineering
IE570
Instrumentation for Non-Instrument Personnel
5
Instrumentations, Control & Telecommunications Engineering
IE580
Modern Distributed Control Sustems (DCS) and Process Instrumentation - Practical Applications
5
Instrumentations, Control & Telecommunications Engineering
IE590
Voice Over IP (VoIP)
5
Instrumentations, Control & Telecommunications Engineering
IE630
Measurement of Process Variables
5
Instrumentations, Control & Telecommunications Engineering
IE640
Fiber Optics Fundamentals
5
Instrumentations, Control & Telecommunications Engineering
IE650
Designing Telecommunications Distribution System
5
Instrumentations, Control & Telecommunications Engineering
IE660
Power Electronics: Devices, Control, Applications, Materials and Troubleshooting
5
Instrumentations, Control & Telecommunications Engineering
IE670
Crude Metering System
5
Instrumentations, Control & Telecommunications Engineering
IE680
Process Control and Safeguarding
5
Instrumentations, Control & Telecommunications Engineering
IE690
Frequency Management and Telecom Regulatory
5
Instrumentations, Control & Telecommunications Engineering
IE700
Security of Modern Control and Automation Systems
5
Instrumentations, Control & Telecommunications Engineering
IE730
Principles and Trends in Modern Industrial Field Instrumentation
5
Instrumentations, Control & Telecommunications Engineering
IE750
Overview of ISA Standards and Applications in the Industry
5
Instrumentations, Control & Telecommunications Engineering
WE010
Corrosion Awareness and Monitoring
5
Mr. Don Bagnoli
Welding, Metallurgy & Corrosion Engineering
WE020
Corrosion In The Oil and Gas Industry
5
Dr. Roger King
Welding, Metallurgy & Corrosion Engineering
WE030
Modern Cathodic Protection Systems - NACE : Design, Fabrication, Installation, Operation and Repair
5
Mr. Neil Webb
Welding, Metallurgy & Corrosion Engineering
WE050
Refinery/Petrochemical Industry Materials/Corrosion
5
Mr. Don Bagnoli
Welding, Metallurgy & Corrosion Engineering
WE060
Materials Selection for Process Plants and Refineries (Material and Corrosion Engineering)
5
Dr. Roberge Perrier
Welding, Metallurgy & Corrosion Engineering
WE070
Metallurgy, Corrosion and Prevention of Failures
5
Mr. Carl Hiensmann
Welding, Metallurgy & Corrosion Engineering
WE080
Metallurgy for Non-Metallurgists / Specialist
5
Mr. Cory Sutherland
Welding, Metallurgy & Corrosion Engineering
WE090
Corrosion for Non-Corrosion Engineers
5
Mr. John Stonehill
Welding, Metallurgy & Corrosion Engineering
WE100
Super Alloys for Gas Turbines
5
Dr. Donald H. Boone
Welding, Metallurgy & Corrosion Engineering
WE110
International Welding codes
5
Mr. Harry Ebert
Welding, Metallurgy & Corrosion Engineering
WE120
Materials Selection for Petrochemical Plants and Refineries
5
Mr. Tony Scribner
Welding, Metallurgy & Corrosion Engineering
WE130
Introduction to Welding Engineering, Fabrication and Inspection
5
Harry Ebert
Welding, Metallurgy & Corrosion Engineering
WE140
International Welding codes
5
Dr. Norman Kellock
Welding, Metallurgy & Corrosion Engineering
WE150
Practical Welding Technology
5
Dr. Norman Kellock
Welding, Metallurgy & Corrosion Engineering
WE160
Post Weld Heat Treatment (HAZ)
5
Mr. Anthony Egan
Welding, Metallurgy & Corrosion Engineering
WE170
Modern Welding Technology : Welding, Fabrication and Inspection ( AWS, ASME & API Codes)
5
Welding, Metallurgy & Corrosion Engineering
WE180
Composites and Relevant Application in the Industry
5
Welding, Metallurgy & Corrosion Engineering
WE190
Practical Composites in Industry
5
Dr. Herman Julsing
Welding, Metallurgy & Corrosion Engineering
WE200
Painting, Coating and Thermal Installation
5
Welding, Metallurgy & Corrosion Engineering
WE210
Fundamentals of Non-Destructive Testing (NDT)
5
Welding, Metallurgy & Corrosion Engineering
WE220
Corrosion Inhibition: Technology, Applications, Selection, Monitoring, Performance, Troubleshooting and Environmental Concerns
5
Dr. Roger King
Welding, Metallurgy & Corrosion Engineering
WE230
Control of Scale and Corrosion in Desalination (MSF)
5
Mr. Scott Farthing
Welding, Metallurgy & Corrosion Engineering
WE240
Metallurgical Failure Analysis and Prevention
5
Mr. Scott Farthing
Welding, Metallurgy & Corrosion Engineering
WE250
Water Scale Corrosion
5
Welding, Metallurgy & Corrosion Engineering
WE260
Materials Selection and Failure Analysis
5
Welding, Metallurgy & Corrosion Engineering
WE270
Engineering Aspects of Welding
5
Welding, Metallurgy & Corrosion Engineering
OE020
Offshore Structures Design, Construction, Inspection, Maintenance and Repair
5
Dr. Jan Vugts
Marine & Offshore Engineering
OE030
Offshore Commercial Diving Technology
5
Dr. Stuart Speers
Marine & Offshore Engineering
OE040
Modern Oil and Gas Marine Terminals: Operations & Management
5
Dr. Graham Finney
Marine & Offshore Engineering
OE050
Submarine Cable Laying, Inspection, Maintenance and Repair
5
Professor James Whyte
Marine & Offshore Engineering
OE060
Performance Monitoring of Offshore Structures
5
Dr. Jack Trojan
Marine & Offshore Engineering
OE070
Underwater Inspection and Maintenance
5
Mr. Ronald Glenn
Marine & Offshore Engineering
OE080
Offshore Pipeline Design, Construction, Inspection, Maintenance and Repair (Subsea Pipeline Engineering)
5
1) Prof. Andrew Palmer 2) Dr. Roger King
Marine & Offshore Engineering
OE090
Offshore Wellhead Operations
5
Mr. Ronald Glenn
Marine & Offshore Engineering
OE100
Subsea BOP and Well Control Equipment
5
Dr. Rick Coombe
Marine & Offshore Engineering
OE110
Offshore Operations
5
Mr. Shaun Grisenthwaite
Marine & Offshore Engineering
OE115
Maritime Law Applications for Offshore Operations
5
Marine & Offshore Engineering
OE120
Marine Fleet Management and Operations
5
Marine & Offshore Engineering
OE130
Underwater Welding Techniques
5
Mr. Ronald Glenn
Marine & Offshore Engineering
OE140
Offshore Logistics and Supply Management
5
Marine & Offshore Engineering
OE150
Offshore Project Management
5
Marine & Offshore Engineering
OE200
Radar Gauge Maintenance
5
Mr. Dan Sterling
Marine & Offshore Engineering
OE250
Anchor Handling with Offshore Fields
5
Mr. Ioan Kenrick
Marine & Offshore Engineering
OE300
Marine Vessels (Unlimited) Stability and Trim for Ship's Officers
5
Dr. Graham Finney
Marine & Offshore Engineering
OE301
Marine Officer's Supervisory and Management Skills
5
Dr. Graham Finney
Marine & Offshore Engineering
OE303
Marine Radar Observer (Unlimited) Training and Certification
5
Mr. Peter Anderson
Marine & Offshore Engineering
OE320
Inspection and Maintenance of Subsea Pipelines & Offshore Structures
5
Mr. Ronald McField
Marine & Offshore Engineering
OE330
Submarine Cable Laying
5
Marine & Offshore Engineering
OE340
Commercial Diving in Oil and Gas Industry
5
Marine & Offshore Engineering
OE350
Remotely Operated Vehicles for Subsea Inspection and Maintenance (ROV)
5
Marine & Offshore Engineering
OE360
Subsea Pipeline Stability and Vibration
5
Marine & Offshore Engineering
OE370
Offshore Survey of Oil and Gas Fields
5
Marine & Offshore Engineering
OE390
Hyperbaric and Atmospheric Welding of Subsea Pipelines and Offshore Structures
5
Marine & Offshore Engineering
OE400
Modern Marine Operation and Management in Oil and Gas Industry
5
Marine & Offshore Engineering
OE410
Oil and Gas Tanker Loading and SPM Management
5
Marine & Offshore Engineering
OE420
Naval Architecture and Stress Analysis
5
Mr. Alexandre Duran
Marine & Offshore Engineering
OE450
Offshore Trenching and Dredging Technology
5
Marine & Offshore Engineering
OE600
Estimation and Cost Control of Offshore Projects
5
Marine & Offshore Engineering
OE650
Platform Design, Fabrication, Construction, Installation and Commissioning
5
Marine & Offshore Engineering
OE500
Offshore Rig Inspection
5
Marine & Offshore Engineering
OE750
Jack Up, Platform and Land Well BOP Control Equipment
5
Dr. Jan Vugts
Marine & Offshore Engineering
OE760
Deepwater BOP and Well Control Equipment & Procedures
5
Dr. Rick Coombe
Marine & Offshore Engineering
OE775
Offshore Pipelines and Risers Inspection, Maintenance and Mechanical Integrity
5
Mr. Marcio Mourelle
Marine & Offshore Engineering
OE780
Offshore Process Technology
5
Marine & Offshore Engineering
OE790
Shipping of Oil and Gas
5
Marine & Offshore Engineering
DE010
Core Logging and Description for Carbonate Rocks & Siliciclastic Rocks
5
Drilling & Reservoir Engineering
DE020
Carbonate Sequence Stratigraphy
5
Drilling & Reservoir Engineering
DE030
Siliciclastic Sequence Stratigraphy
5
Drilling & Reservoir Engineering
DE040
Carbonate Reservoirs
5
Drilling & Reservoir Engineering
DE050
Clastic Reservoirs
5
Drilling & Reservoir Engineering
DE060
Gas Lift Operations
5
Drilling & Reservoir Engineering
DE070
Advanced Completion Engineering
5
Drilling & Reservoir Engineering
DE080
Integrating Geoscience Into Carbonate Reservoir Management
5
Drilling & Reservoir Engineering
DE090
Reservoir Engineering and Management: Analysis, Characterization, Simulation, Integration, Statistics & Naturally Fractured
5
Drilling & Reservoir Engineering
DE100
Well Completion and Work-Over
5
Drilling & Reservoir Engineering
DE110
Hole Cleaning
5
Dr. Konstantin Zorbalas
Drilling & Reservoir Engineering
DE115
Completion and Work-Over Operation
5
Drilling & Reservoir Engineering
DE120
Time to Depth Conversion and Velocity Modeling
5
Drilling & Reservoir Engineering
DE130
Advanced Structural Interpretation and Geological Modeling Based on Seismic Sections
5
Drilling & Reservoir Engineering
DE140
Formation Evaluation
5
Drilling & Reservoir Engineering
DE150
Drilling and Completion Technology
5
Drilling & Reservoir Engineering
DE155
Smart Well Drilling and Completion: Horizontal Wells & Integrity Concern
5
Drilling & Reservoir Engineering
DE160
ESP Application Engineering
5
Drilling & Reservoir Engineering
DE180
Directional and Horizontal Well Planning, Techniques and Procedures
5
Drilling & Reservoir Engineering
DE190
Cementing Integrity Evaluation
5
Drilling & Reservoir Engineering
DE200
Drilling Operation Management
5
Drilling & Reservoir Engineering
DE210
Basic Reseroir Engineering for Non-Reservoir Engineer
5
Drilling & Reservoir Engineering
DE220
Advanced Reservoir Management
5
Drilling & Reservoir Engineering
DE230
PETREL, 3D Geological Modelling
5
Drilling & Reservoir Engineering
DE240
Petroleum Reservoir Management
5
Drilling & Reservoir Engineering
DE280
Advanced Well Testing Design and Analysis
5
Drilling & Reservoir Engineering
DE300
Integration of Rocks, Logs and Test Data
5
Drilling & Reservoir Engineering
DE320
Advanced Drilling Operation Management
5
Drilling & Reservoir Engineering
DE400
Drilling, Production and Completion Chemicals in the Oil/Gas Industry
5
Mr. John Foster
Drilling & Reservoir Engineering
DE410
Drilling Project and Risk Management
5
Mr. Richard Jachnik
Drilling & Reservoir Engineering
DE440
Advanced PVT and EOS Characterization
5
Dr. Marius Popa
Drilling & Reservoir Engineering
DE450
Advanced Reservoir Simulation
5
Dr. Marius Popa
Drilling & Reservoir Engineering
DE460
Artificial Lift Systems and Optimization Technology
5
Dr. Marius Popa
Drilling & Reservoir Engineering
DE470
AVO and Seismic Attributes: Principles & Applications
5
Dr. Marius Popa
Drilling & Reservoir Engineering
DE480
Practical Application of Oil/Gas Drilling Techniques
5
Dr. Marius Popa
Drilling & Reservoir Engineering
DE490
Directional Drilling
5
Dr. Marius Popa
Drilling & Reservoir Engineering
DE500
The Screening of Oil Reservoirs for Enhanced Oil Recovery Processes
5
Dr. David Sawyer
Drilling & Reservoir Engineering
DE510
Applied Geostatistics For Oil and Gas
5
Dr. Ricardo A. Olea
Drilling & Reservoir Engineering
DE520
Reservoir Seismic Attributes: Analysis And Interpretation
5
Dr. Quincy Chen
Drilling & Reservoir Engineering
DE530
Geological and Engineering Aspects Of Horizontal Wells
5
Dr. Necmettin Mungan
Drilling & Reservoir Engineering
DE540
Drilling Rig Control and Operation
5
Dr. Rick Coombe
Drilling & Reservoir Engineering
DE550
Secondary Recovery Processes
5
Dr. Necmettin Mungan
Drilling & Reservoir Engineering
DE560
Marine Tensioning and Drilling Compensation
5
Dr. Necmettin Mungan
Drilling & Reservoir Engineering
DE570
Basin Analysis And Hydrocarbon Potential
5
Dr. Tor Nilsen
Drilling & Reservoir Engineering
DE580
Consequences of Acquisition and Processing on 2D /3D Seismic Data Interpretation and Avo Analysis
5
Dr. Bruce Hart
Drilling & Reservoir Engineering
DE590
Practical Petrophysical Log Analysis
5
Dr. John H. Doveton
Drilling & Reservoir Engineering
DE600
Integrated Reservoir Characterization and Geo-Engineering Modeling
5
Dr. Lynn Watney
Drilling & Reservoir Engineering
DE610
Advance Oil/Gas Drilling Technology (Onshore and Offshore)
5
Dr. Quincy Chen
Drilling & Reservoir Engineering
DE620
Deep Water Reservoirs and Turbidites Systems
5
Dr. Abraham Zelilidis
Drilling & Reservoir Engineering
DE630
Reservoir geology - sedimentology, petrography, pore space evolutions, architectural types
5
Dr. Marius Popa
Drilling & Reservoir Engineering
DE640
Introduction sedimentology - applications for oil industry
5
Dr. Marius Popa
Drilling & Reservoir Engineering
DE650
Introductory sedimentary petrology; applications for petrographic characterization of clastic and carbonate reservoirs
5
Dr. Marius Popa
Drilling & Reservoir Engineering
DE660
Clastic depositional systems and facies models - associated 3-D architectures and economic potential
5
Dr. Marius Popa
Drilling & Reservoir Engineering
DE670
Sequence and architectural analysis of sedimentary sequences: basic principles and applications to oil systems
5
Dr. Marius Popa
Drilling & Reservoir Engineering
DE680
Petrology and diagenesis of clastic reservoirs: pore-space dynamics and implications in hydrocarbon migration
5
Dr. Marius Popa
Drilling & Reservoir Engineering
DE690
Sedimentary metallofacies: ore-bearing sedimentary sequences and associated architectures
5
Dr. Marius Popa
Drilling & Reservoir Engineering
DE700
Updated Techniques in Enhanced Oil Recovery (EOR)
5
Mr. Mahabub
Drilling & Reservoir Engineering
DE710
Advanced LOG/LOGGING Interpretation Technology
5
Mr. Mahabub
Drilling & Reservoir Engineering
DE720
Life Cycle Reservoir Management
5
Dr. Marius Popa
Drilling & Reservoir Engineering
DE730
Reservoir Fluid Characterization and Management
5
Dr. Marius Popa
Drilling & Reservoir Engineering
DE740
Structural Geology
5
Dr. Tom Cuba
Drilling & Reservoir Engineering
DE750
Wireline Techniques
5
Dr. Mahabub
Drilling & Reservoir Engineering
DE760
Advanced Petrophysics/Interpretation of Cased Hole Logs
5
Dr. Mahabub
Drilling & Reservoir Engineering
DE770
Nitrogen Injection Application for Reservoir Pressure Maintenance and Enhanced Oil Recovery
5
Dr. Mahabub
Drilling & Reservoir Engineering
DE780
Drilling Fluids Technology
5
Dr. Mahabub
Drilling & Reservoir Engineering
DE790
Advanced Oil Production Optimization
5
Mr. Roger Hough
Drilling & Reservoir Engineering
DE800
Special Core Analysis for Engineers and Geologists
5
Dr. Roger Hough
Drilling & Reservoir Engineering
DE810
Water Flooding
5
Dr. James Lea
Drilling & Reservoir Engineering
DE820
Basic Well Test Analysis
5
Dr. Zaki Bassiouni
Drilling & Reservoir Engineering
DE830
Advanced Drilling, Completion and Workovers Fluids
5
Dr. Marius Popa
Drilling & Reservoir Engineering
DE840
Advanced Cementing
5
Dr. Marius Popa
Drilling & Reservoir Engineering
DE850
Advance Drilling Fluids and Advanced Cementing
5
Mr. George E. Hill and Mr. D.G. (Jerry) Calvert
Drilling & Reservoir Engineering
DE860
Designing Underbalanced Drilling Operation
5
Dr. Marius Popa
Drilling & Reservoir Engineering
DE870
Slickline and Perforating Operations Fundamentals
5
Mr. Konstantino Zorbalas
Drilling & Reservoir Engineering
DE880
Advanced Drilling, Completion and Workovers Technology
5
Dr. Marius Popa
Drilling & Reservoir Engineering
DE890
3D Seismic Course
5
Drilling & Reservoir Engineering
DE900
Fracture Characterization in Reservoir
5
Drilling & Reservoir Engineering
DE910
Discrete Fracture Network (DFN) Modeling
5
Mr. Willem Mullany
Drilling & Reservoir Engineering
DE920
Electric Submersible Pumping
5
Mr. David L. Divine
Drilling & Reservoir Engineering
DE930
Gas Lift Design and Optimization Technology
5
Drilling & Reservoir Engineering
DE940
Maximizing the Productivity of Oil and Gas Wells
5
Mr. Robert Smyth
Drilling & Reservoir Engineering
DE950
Basic Log Analysis
5
Dr. Marius Popa
Drilling & Reservoir Engineering
DE960
Well Composite, Construction, Integrity and Completion
5
Dr. Carl Chiffer
Drilling & Reservoir Engineering
DE970
Stuck Pipe Prevention
5
Drilling & Reservoir Engineering
DE980
Advanced Well Control
5
Drilling & Reservoir Engineering
DE990
Coiled Tubing Technology
5
Drilling & Reservoir Engineering
SE010
Blast Resistant Buildings
5
Mr. Del Forbes
Structural & Civil Engineering
SE020
Petrochemical Plant Structure Design and Remediation
5
Mr. Del Forbes
Structural & Civil Engineering
SE030
Durability of Reinforced Concrete Structures
5
Professor Cigna & Dr. Andrea Mercalli
Structural & Civil Engineering
SE040
Building Preventive Maintenance
5
Mr. Peter Cox
Structural & Civil Engineering
SE050
Concrete Structure: Design, Maintenance and Reliability
5
Structural & Civil Engineering
SE060
Sloping, Benching, Embankments and Bunwalls
5
Structural & Civil Engineering
SE070
Soil Geotechnical Investigations and Soil Improvement
5
Structural & Civil Engineering
SE080
Steel Structures: Design, Inspection, Maintenance and Durability
5
Structural & Civil Engineering
SE090
Advanced Asphalt Paving Installation
5
Structural & Civil Engineering
RE010
Maintenance Auditing, Benchmarking and Performance Improvement Towards World-Class Status
5
Prof. Keith Balchin
Reliability, Maintenance, Integrity & Inspection Eng
RE020
Effective Reliability Maintenance
5
Mr. Kenneth Lees
Reliability, Maintenance, Integrity & Inspection Eng
RE030
Rotating Equipment Reliability Optimization and Continuous Improvement
5
Mr. Fred Geitner
Reliability, Maintenance, Integrity & Inspection Eng
RE040
Mechanical Integrity and Reliability
5
Mr. Robert Kean
Reliability, Maintenance, Integrity & Inspection Eng
RE050
Machinery Vibration Analysis (V.I. Specialist Level-I)
5
Mr. Mamdouh B. Al-Aidarous
Reliability, Maintenance, Integrity & Inspection Eng
RE060
Machinery Vibration Analysis Level - II
5
Mr. Mamdouh B. Al-Aidarous
Reliability, Maintenance, Integrity & Inspection Eng
RE070
Maintenance of Rotating Machines
5
Mr. Robert Kean
Reliability, Maintenance, Integrity & Inspection Eng
RE080
Maintenance Leadership and Technology
5
Mr. Keith Balchin
Reliability, Maintenance, Integrity & Inspection Eng
RE090
API 579: Fitness-for-Service (FFS) and Damage Mechanisms of Process Plant Equipment , Piping and Storage Facilities
5
Mr. L. Louis Loushin
Reliability, Maintenance, Integrity & Inspection Eng
RE100
RBI and FFS of Pipeline, Piping, Vessel, Tank & Process Plant Equipment (API 579-580-581)
5
Mr. George Antaki
Reliability, Maintenance, Integrity & Inspection Eng
RE110
Condition based Maintenance and Condition Monitoring
5
Prof. Keith Balchin
Reliability, Maintenance, Integrity & Inspection Eng
RE120
Failure Prevention and Repairs to Static Process Equipment and Piping
5
Mr. Fred Geitner
Reliability, Maintenance, Integrity & Inspection Eng
RE130
Principles of Destruction Analysis
5
Mr. Fred Geitner
Reliability, Maintenance, Integrity & Inspection Eng
RE140
Machinery Failure Analysis and Prevention
5
Mr. Fred Geitner
Reliability, Maintenance, Integrity & Inspection Eng
RE150
Machinery Root Cause Failure Analysis (RCFA)
5
Mr. Fred Geitner
Reliability, Maintenance, Integrity & Inspection Eng
RE160
Principles of Machinery Failure Analysis
5
Mr. Fred Geitner
Reliability, Maintenance, Integrity & Inspection Eng
RE170
FMEA: Failure Mode, Effect And Criticality Analysis in Product Design, Manufacturing and Service
5
Mr. Fred Geitner
Reliability, Maintenance, Integrity & Inspection Eng
RE180
Total Plant, Reliability Centered Maintenance (RCM)
5
Mr Kenneth Lees
Reliability, Maintenance, Integrity & Inspection Eng
RE190
Practical Machinery Vibration Monitoring, Analysis and Predictive Maintenance
5
Dr. C. Scheffer
Reliability, Maintenance, Integrity & Inspection Eng
RE200
Non-Destructive Testing, ASME Section V
5
Dr. George Patel
Reliability, Maintenance, Integrity & Inspection Eng
RE210
Modern Maintenance and Reliability Management: Planning, Estimating, Scheduling & Control (Cost Effective Maintenance Management)
5
Mr. Robert Kean
Reliability, Maintenance, Integrity & Inspection Eng
RE220
Assessment of Material Aging and Prediction of Remaining Life
5
Mr. Don Bagnolli
Reliability, Maintenance, Integrity & Inspection Eng
RE230
Physical Asset Management for Maintenance Excellence
5
Mr. John Dimberson
Reliability, Maintenance, Integrity & Inspection Eng
RE240
Machinery Alignment
5
Mr. Bernhard Farmbauer
Reliability, Maintenance, Integrity & Inspection Eng
RE245
Maintenance and Inspection of Utility Piping Network
5
Reliability, Maintenance, Integrity & Inspection Eng
RE250
Machinery Reliability Assurance
5
Mr. Fred Gietner
Reliability, Maintenance, Integrity & Inspection Eng
RE260
Developing Mechanical Integrity Programs
5
Mr. Steve Anderson
Reliability, Maintenance, Integrity & Inspection Eng
RE270
Ultrasonic Testing Levels I and II: Fundamentals, Techniques, Practical Aspects, Evaluation and Interpretation
5
Mr. Tony Egan
Reliability, Maintenance, Integrity & Inspection Eng
RE280
Eddy Current Levels I and II
5
Mr. Tony Egan
Reliability, Maintenance, Integrity & Inspection Eng
RE290
API 510: Pressure Vessel Inspection Code: Maintenance, Inspection, Rating,
Repair, and Alteration (Training only)
10 weeks
Mr. Oran Lewis
Reliability, Maintenance, Integrity & Inspection Eng
RE300
Fundamental of Non-Destructive Testing (NDT)
5
Mr. Hany Ashkar
Reliability, Maintenance, Integrity & Inspection Eng
RE310
API 570: PIPING INSPECTION CODE: Inspection, Repair, Alteration and Rerating of In-Service Piping Systems (API Exam Preparation Training)
5
Reliability, Maintenance, Integrity & Inspection Eng
RE320
API 653: TANK INSPECTION CODE: Inspection, Repair, Alteration and Reconstruction of Steel Aboveground Storage Tanks Used in the Petrochemical Industry (Training Only)
5
Reliability, Maintenance, Integrity & Inspection Eng
RE330
ASNT Fundamentals of NDT
3
Mr. Hany Ashkar
Reliability, Maintenance, Integrity & Inspection Eng
RE340
Liquid Penetrant ASNT Level-I Training and Certification
2
Mr. Hany Ashkar
Reliability, Maintenance, Integrity & Inspection Eng
RE350
Liquid Penetrant ASNT Level-II Training and Certification
2
Mr. Hany Ashkar
Reliability, Maintenance, Integrity & Inspection Eng
RE360
Magnetic Particle Testing Method ASNT Level-I Training and Certification
3
Mr. Dan Sterling
Reliability, Maintenance, Integrity & Inspection Eng
RE370
Magnetic Particle Testing Method ASNT Level II Training and Certification
2
Mr. Dan Sterling
Reliability, Maintenance, Integrity & Inspection Eng
RE380
Ultrasonic Testing ASNT Level-I Training and Certification
6
Mr. Martin Saunders
Reliability, Maintenance, Integrity & Inspection Eng
RE390
Ultrasonic Testing ASNT Level-II Training and Certification
6
Mr. Martin Saunders
Reliability, Maintenance, Integrity & Inspection Eng
RE400
Radiographic Testing ASNT Level-I Training and Certification
6
Mr. Peter Evans
Reliability, Maintenance, Integrity & Inspection Eng
RE410
Radiographic Testing ASNT Level-II Training and Certification
6
Mr. Peter Evans
Reliability, Maintenance, Integrity & Inspection Eng
RE420
ASNT Radiographic Film Interpretation Training and Certification
6
Mr. Peter Evans
Reliability, Maintenance, Integrity & Inspection Eng
RE430
ASNT Radiation Safety Training and Certification
6
Mr. Peter Evans
Reliability, Maintenance, Integrity & Inspection Eng
RE440
API Standards (620, 650 and 653) Introductory Tank Course
5
Mr. Jack Mooney
Reliability, Maintenance, Integrity & Inspection Eng
RE450
API 936: Refractory Design, Installation, Inspection and Repair (Training Only)
5
Mr. Neil Webb
Reliability, Maintenance, Integrity & Inspection Eng
RE460
AWS Certified Welding Inspector Exam Preparation (API 1104)
5
Reliability, Maintenance, Integrity & Inspection Eng
RE470
Coating Inspector I
5
Mr. Andre Farris
Reliability, Maintenance, Integrity & Inspection Eng
RE480
Refractory Inspection and Application
5
Mr. Izak Labuschagne
Reliability, Maintenance, Integrity & Inspection Eng
RE490
Technical Integrity and Engineered Safety in Petrochemical Plants, Refineries and Oil/Gas Plants
5
Mr. Steve Anderson
Reliability, Maintenance, Integrity & Inspection Eng
RE500
Coating Inspector Level -II
5
Mr. Andre Farris
Reliability, Maintenance, Integrity & Inspection Eng
RE510
Coating Inspector Level -III
5
Mr. Andre Farris
Reliability, Maintenance, Integrity & Inspection Eng
RE520
Coating Inspector peer review
5
Mr. Andre Farris
Reliability, Maintenance, Integrity & Inspection Eng
RE530
Scale Removal and Prevention techniques
5
Mr. Charles McDonalds
Reliability, Maintenance, Integrity & Inspection Eng
RE540
Reliability Analysis in Civil and Environmental Engineering
5
Mr. Dirk Hasseberok
Reliability, Maintenance, Integrity & Inspection Eng
RE550
API-580/581: Risk Based Inspection Methodologies and Practices in Refineries, Gas, Oil and Petrochemical Facilities (RBI)
5
Mr. L. Louis Loushin
Reliability, Maintenance, Integrity & Inspection Eng
RE560
Risk Based Inspection (RBI) for Process Industry
5
Mr. Steve Anderson
Reliability, Maintenance, Integrity & Inspection Eng
RE570
Cost Effective Maintenance Management (Advanced Cost Analysis and Performance Measurement)
5
Reliability, Maintenance, Integrity & Inspection Eng
RE580
Advanced Machinery Reliability Analysis
5
Reliability, Maintenance, Integrity & Inspection Eng
RE590
Effective Reliability and Maintenance Best Practice
5
Reliability, Maintenance, Integrity & Inspection Eng
RE600
Mechanical Integrity and Reliability in Process Plant
5
Reliability, Maintenance, Integrity & Inspection Eng
RE610
Preventive and Predictive Maintenance
5
Reliability, Maintenance, Integrity & Inspection Eng
RE620
Thermography (camera) Training
5
Reliability, Maintenance, Integrity & Inspection Eng
RE630
Physical Asset Management
5
Reliability, Maintenance, Integrity & Inspection Eng
RE640
Condition Based Monitoring and Maintenance
5
Reliability, Maintenance, Integrity & Inspection Eng
RE650
Total Plant Maintenance
5
Reliability, Maintenance, Integrity & Inspection Eng
RE660
Computerized Maintenance Management System (CMMS)
5
Prof. Keith Balchin
Reliability, Maintenance, Integrity & Inspection Eng
RE670
API 1163: In-line Inspection Systems Qualification Standards
5
Mr. George Anataki
Reliability, Maintenance, Integrity & Inspection Eng
RE680
Maintenance Safety and Efficiency
5
Reliability, Maintenance, Integrity & Inspection Eng
RE690
Evaluating the Maintenance Program
5
Reliability, Maintenance, Integrity & Inspection Eng
RE700
Maintenance Management: Parts and Materials and Inventory Control Process Stages
5
Reliability, Maintenance, Integrity & Inspection Eng
RE710
Root Cause Failure Analysis (RCFA): Methods and Techniques
5
Reliability, Maintenance, Integrity & Inspection Eng
RE715
Root Cause Failure Analysis (RCFA) for Control and Instrumentation
5
Reliability, Maintenance, Integrity & Inspection Eng
RE720
Troubleshooting Mechanical and Rotating Equipment
5
Mr. Fred Geitner
Reliability, Maintenance, Integrity & Inspection Eng
RE730
Plant Troubleshooting and Maintenance
5
Mr. Fred Geitner
Reliability, Maintenance, Integrity & Inspection Eng
RE740
Acid and Ball Cleaning
5
Reliability, Maintenance, Integrity & Inspection Eng
RE750
Planning and Scheduling Maintenance Works
5
Reliability, Maintenance, Integrity & Inspection Eng
RE760
Reliability, Maintenance, Integrity and Inspection Engineering
5
Reliability, Maintenance, Integrity & Inspection Eng
RE780
Reliability, Availability, Maintainability Study (RAM)
5
Reliability, Maintenance, Integrity & Inspection Eng
RE790
Introduction to API 510
5
Reliability, Maintenance, Integrity & Inspection Eng
RE800
Stationary Equipment Inspection and Maintenance
5
Reliability, Maintenance, Integrity & Inspection Eng
RE850
Equipment Spareparts, Analysis and Control
5
Reliability, Maintenance, Integrity & Inspection Eng
LE010
Solid Phase Extraction Technology and Techniques in the Analytical Laboratory
5
Dr. Claude Luchssi
Analytical Laboratory & Analyzers Engineering
LE020
Effective Management of the Chemical Analysis Support
5
Dr. Roger King
Analytical Laboratory & Analyzers Engineering
LE030
Practical Statistical Analysis of Lab Data
5
Dr. Claude Lucchessi
Analytical Laboratory & Analyzers Engineering
LE040
Moisture Analyzer
5
Dr. Claude Lucchessi
Analytical Laboratory & Analyzers Engineering
LE050
Laboratory Safety and Health
5
Dr. Claude Lucchessi
Analytical Laboratory & Analyzers Engineering
LE060
Practical Problem Solving in Chemical Analysis
5
Dr. Claude Lucchessi
Analytical Laboratory & Analyzers Engineering
LE070
Chemical Laboratory: Operations, Equipments, Instruments, Quality and Safety
5
Dr. Claude Lucchessi
Analytical Laboratory & Analyzers Engineering
LE080
Basic Chemistry for Laboratory Technicians and Analyst
5
Mr. Dan Mehonoshen
Analytical Laboratory & Analyzers Engineering
LE090
Statistical Analysis of Laboratory Data
5
Mr. Dan Mehonoshen
Analytical Laboratory & Analyzers Engineering
LE100
Analytical Chemistry and Process Analyzers
5
Mr. Adriaan Van Der Merwe
Analytical Laboratory & Analyzers Engineering
LE110
Set up and Run Experiments
5
Mr. Tim Alcock
Analytical Laboratory & Analyzers Engineering
LE120
CSI 2120 Machinery Analyzer
5
Analytical Laboratory & Analyzers Engineering
LE130
Laboratory Equipments, Instruments and Safety
5
Mr. Adriaan J. Van Der Merwe
Analytical Laboratory & Analyzers Engineering
LE140
Modern Laboratory Management
5
Mr. Barry Winters
Analytical Laboratory & Analyzers Engineering
LE150
Effective Management of the Chemical Analysis Support
5
Mr. Barry Winters
Analytical Laboratory & Analyzers Engineering
LE160
Gas Chromatography: Fundamentals, Troubleshooting and Method Development
5
Dr. Herman Julsing
Analytical Laboratory & Analyzers Engineering
LE170
GC Troubleshooting and User maintenance GAS Chromatography
5
Dr. Herman Julsing
Analytical Laboratory & Analyzers Engineering
LE180
Chromatography/Mass Spectrometry (GC/MS): Technology, Problem Solving and Latest Practice
5
Prof. Pete Ludovice
Analytical Laboratory & Analyzers Engineering
LE190
Laboratory Quality Management (ISO 17025): SOP, Accreditation, Documentation and Auditing
5
Mr. Dan Mehonoshen
Analytical Laboratory & Analyzers Engineering
LE200
Process Analyzer Techniques - Online and Offline (Lab Equipment Overview & Maintenance)
5
Dr. Jimmy G Converse
Analytical Laboratory & Analyzers Engineering
LE210
Advance Gas Chromatography Techniques and Trouble shooting
5
Mr. Dan Mehonoshen
Analytical Laboratory & Analyzers Engineering
LE220
Data Validation in Analytical Laboratories
5
Mr. Dan Mehonoshen
Analytical Laboratory & Analyzers Engineering
LE230
Safety in the Laboratory
5
Mr. Dan Mehonoshen
Analytical Laboratory & Analyzers Engineering
LE240
Laboratory Auditing
5
Mr. Dan Mehonoshen
Analytical Laboratory & Analyzers Engineering
LE250
Experimental Design Program
5
Mr. Dan Mehonoshen
Analytical Laboratory & Analyzers Engineering
LE260
Good Laboratory Practice
5
Analytical Laboratory & Analyzers Engineering
LE270
High Performance Liquid Chromatography
5
Analytical Laboratory & Analyzers Engineering
LE280
Samples Preparation
5
Analytical Laboratory & Analyzers Engineering
LE290
Advanced GLP: Uncertainty Measurement and International Standards
Mr. Dan Mehonoshen
Analytical Laboratory & Analyzers Engineering
LE300
General Analytical Chemistry
5
Analytical Laboratory & Analyzers Engineering
LE310
Advanced Good Laboratory Practice
5
Analytical Laboratory & Analyzers Engineering
LE320
Statistics, Validation, Uncertainty and Quality of Chemical Laboratory
5
Analytical Laboratory & Analyzers Engineering
LE330
Online Analyzers Application and Troubleshooting
5
Analytical Laboratory & Analyzers Engineering
LE340
Best Practice of Measurement Uncertainty in Chemical Testing Laboratories
5
Dr. Masimilliano Procelli
Analytical Laboratory & Analyzers Engineering
LE350
Analytical Instrumentation for Laboratory
5
Mr. Dan Mehonoshen
Analytical Laboratory & Analyzers Engineering
LE360
Sample Development and Preparation in Analytical Laboratory
5
Mr. Dan Mehonoshen
Analytical Laboratory & Analyzers Engineering
LE370
Validation and Qualification in Analytical Laboratories
5
Dr. Masimilliano Procelli
Analytical Laboratory & Analyzers Engineering
LE380
Fundamentals of Analytical Chemistry
5
Dr. Masimilliano Procelli
Analytical Laboratory & Analyzers Engineering
LE390
Spectroscopic Methods in Analytical Chemistry
5
Mr. Dan Mehonoshen
Analytical Laboratory & Analyzers Engineering
LE400
Industrial Analytical Chemistry
5
Mr. Dan Mehonoshen
Analytical Laboratory & Analyzers Engineering
LE410
Method Validation and Uncertainty Calculation for Test Method
5
Dr. Masimilliano Procelli
Analytical Laboratory & Analyzers Engineering
LE420
Trace Analysis: Applications, Methodologies, Techniques, Sample Preparation, Measurement, Removal and Reporting
5
Analytical Laboratory & Analyzers Engineering
LE430
Safety in Analytical Laboratories
5
Analytical Laboratory & Analyzers Engineering
LE440
Laboratory Instrument Calibration
5
Analytical Laboratory & Analyzers Engineering
LE450
Laboratory Environmental Analysis: Air, Soils and Water
5
Analytical Laboratory & Analyzers Engineering
LE460
Separation Technology in Analytical Laboratory
5
Analytical Laboratory & Analyzers Engineering
LE500
Advanced Laboratory Statistical Techniques
5
Analytical Laboratory & Analyzers Engineering
LE550
ISO 17025:2005 Internal Auditor
5
Analytical Laboratory & Analyzers Engineering
LE560
Advanced Statistical Analysis of Laboratory Data: Method Development, Method Validation, Uncertainty, Calibration, SQC and Data Interpretation
5
Analytical Laboratory & Analyzers Engineering
HE002
Advanced Process Hazard Analysis Methods and Leadership (HAZOP, What-if, FMEA)
5
Mr. John Hauser
Safety, Hazards, Risk, Health & Environmental Engg
HE010
Self-contained Breathing Apparatus/ Airline Practical Training Course
5
Mr. Shaun Grisenthwaite
Safety, Hazards, Risk, Health & Environmental Engg
HE020
Oil and Gas Operations : Environmental Concerns and Solutions
5
Dr. Russell Hanley
Safety, Hazards, Risk, Health & Environmental Engg
HE030
Modern Safety Management in Industrial Plants (OSHA PSM 29 CFR 1910.119)
5
Dr. Herman Julsing
Safety, Hazards, Risk, Health & Environmental Engg
HE040
Major Emergency Management Control
5
Safety, Hazards, Risk, Health & Environmental Engg
HE050
Asset Integrity and Engineered Safety in Process Industry
5
Safety, Hazards, Risk, Health & Environmental Engg
HE055
STOP
5
Safety, Hazards, Risk, Health & Environmental Engg
HE060
Occupational Health, Safety and Environment (HSE)
5
Mr. Dirk Hasseberok
Safety, Hazards, Risk, Health & Environmental Engg
HE065
Risk and Hazard Analysis in Plastics Industry
6
Safety, Hazards, Risk, Health & Environmental Engg
HE070
Hazardous Waste Management and Pollution Prevention
5
Mr. Eric Goldman
Safety, Hazards, Risk, Health & Environmental Engg
HE080
Best Practice in Sewage and Industrial Waste Water Treatment Technologies & Environmental Protection
5
Mr. Gary Brown
Safety, Hazards, Risk, Health & Environmental Engg
HE090
Process Safety Management
5
Mr. Colin Easton
Safety, Hazards, Risk, Health & Environmental Engg
HE100
Diploma in Environmental Management
20
Safety, Hazards, Risk, Health & Environmental Engg
HE110
Hazardous Chemicals: Handling, Storage, Disposal, Monitoring and Response
5
Mr. Colin Easton
Safety, Hazards, Risk, Health & Environmental Engg
HE115
Hazardous Material/Waste Emergency Spill Response (OSHA and NFPA Standards)
5
Safety, Hazards, Risk, Health & Environmental Engg
HE120
Fire Fighter and Fire Rescue
5
Mr. Joseph James
Safety, Hazards, Risk, Health & Environmental Engg
HE125
Fire Truck Operation
5
Safety, Hazards, Risk, Health & Environmental Engg
HE130
Handling Hazardous Materials and Chemicals
5
Mr. Izak Labuschagne
Safety, Hazards, Risk, Health & Environmental Engg
HE135
Provision of Training for Housekeeping and Dangers of Falling Objects
5
Safety, Hazards, Risk, Health & Environmental Engg
HE140
Risk Assessment within Production Operations
5
Dr. John Law
Safety, Hazards, Risk, Health & Environmental Engg
HE145
Train the Trainer: Risk Assessment
5
Safety, Hazards, Risk, Health & Environmental Engg
HE150
Safety Engineering and Risk Management
5
Dr. Herman Julsing
Safety, Hazards, Risk, Health & Environmental Engg
HE155
Train the Trainer: Work Permit Procedures
5
Safety, Hazards, Risk, Health & Environmental Engg
HE160
Safety Management in Hazardous Locations
5
Mr. Jim Kallock
Safety, Hazards, Risk, Health & Environmental Engg
HE170
Integrated Contingency Planning for Industrial Emergencies (ICP)
5
Mr. Keith Balchin
Safety, Hazards, Risk, Health & Environmental Engg
HE180
Environmental Management and Technology (EMT)
5
Dr. Russell Hanley
Safety, Hazards, Risk, Health & Environmental Engg
HE190
HLO and Offshore Helideck Safety
5
Mr. Joseph James
Safety, Hazards, Risk, Health & Environmental Engg
HE200
Offshore Reliability, HAZOP, Risk and Safety
5
Safety, Hazards, Risk, Health & Environmental Engg
HE205
Basic HAZOP Study
5
Safety, Hazards, Risk, Health & Environmental Engg
HE210
Best Understanding and Implementation of Modern HSE Management System
5
Safety, Hazards, Risk, Health & Environmental Engg
HE220
Risk Analysis and Preventing Human Errors
5
Mr. Izak Labuschagne
Safety, Hazards, Risk, Health & Environmental Engg
HE240
Safety Auditing, Hazard Identification, and Site Inspection (USA BEAC Examination Preparation Course)
5
Mr. Fred Harwell
Safety, Hazards, Risk, Health & Environmental Engg
HE250
Risk Assessment in Industrial Plants (Risk Assessment within Production Operations)
5
Dr. Herman Julsing
Safety, Hazards, Risk, Health & Environmental Engg
HE255
Environmental Risk Assessment in Process Industry
5
Safety, Hazards, Risk, Health & Environmental Engg
HE260
Environmental Impact Assessment (EIA) and Life Cycle Assessment (ISO 14001/14040)
5
Dr. Russell Hanley
Safety, Hazards, Risk, Health & Environmental Engg
HE270
Safe Isolation of Process Plant and Equipment (Lockout & Tagout)
5
Dr. Jan de Kock
Safety, Hazards, Risk, Health & Environmental Engg
HE280
HAZMAT APPLICATIONS:Petroleum Products (LPG, LNG, CNG, Propane, Hydrogen, Gasoline, Diesel and MTBE)
5
Mr. Izak Labuschagne
Safety, Hazards, Risk, Health & Environmental Engg
HE290
Radiation Protection in Industry
5
Mr. Patrick Garland
Safety, Hazards, Risk, Health & Environmental Engg
HE300
Hazardous Area Classification
5
Mr. Wiliam Mullany
Safety, Hazards, Risk, Health & Environmental Engg
HE310
Advanced HSEM Training for HSE Professionals
5
Mr. Izak Labuschagne
Safety, Hazards, Risk, Health & Environmental Engg
HE320
Management Awareness of HSEM Training
5
Dr. Herman Julsing
Safety, Hazards, Risk, Health & Environmental Engg
HE330
Contractor HSEM Awareness
5
Dr. Herman Julsing
Safety, Hazards, Risk, Health & Environmental Engg
HE340
Internal HSEM Auditing
5
Mr. Izak Labuschagne
Safety, Hazards, Risk, Health & Environmental Engg
HE350
HSE Risk Management and Staff Auditing
5
Mr. Izak Labuschagne
Safety, Hazards, Risk, Health & Environmental Engg
HE360
Divisional Gap Analysis for HSEM
5
Dr. Herman Julsing
Safety, Hazards, Risk, Health & Environmental Engg
HE370
Naturally Occurring Radioactive Material (NORM)
5
Mr. Warren McBride
Safety, Hazards, Risk, Health & Environmental Engg
HE380
Electrical Safety Course
1
Mr. John Michaila
Safety, Hazards, Risk, Health & Environmental Engg
HE390
COSHH Training (Control of Substances Hazardous to Health)
5
Mr. Izak Labuschagne
Safety, Hazards, Risk, Health & Environmental Engg
HE400
Loss Prevention and Safe Working Procedures
5
Dr. John Law
Safety, Hazards, Risk, Health & Environmental Engg
HE410
Quantified Risk Assessment (QRA)
5
Mr. Dirk Hasseberok
Safety, Hazards, Risk, Health & Environmental Engg
HE420
Understanding the ISO 14001 Specification
5
Mr. Eric Goldman
Safety, Hazards, Risk, Health & Environmental Engg
HE430
Lifting and Rigging
4
Mr. Shaun Grisenthwaite
Safety, Hazards, Risk, Health & Environmental Engg
HE440
Lifting and Rigging Equipment: Selection, Sizing, Applications, Operation, Diagnostic Testing, Troubleshooting & Maintenance
5
Mar. Keith Balchin
Safety, Hazards, Risk, Health & Environmental Engg
HE450
OHSAS 18001: Fundamentals, Auditing, Implementation and Integration
5
Mr. Izak Labuschagne
Safety, Hazards, Risk, Health & Environmental Engg
HE460
Advanced Lifting Management
5
Safety, Hazards, Risk, Health & Environmental Engg
HE470
Fire Service Casualty Rescue Techniques in Petrochemical Plants
5
Safety, Hazards, Risk, Health & Environmental Engg
HE480
Handling Air Supplied System Respirators
5
Safety, Hazards, Risk, Health & Environmental Engg
HE490
Safety Process in Refinery
5
Safety, Hazards, Risk, Health & Environmental Engg
HE500
Personal Protective Equipment Course
1
Mr. Shaun Grisenthwaite
Safety, Hazards, Risk, Health & Environmental Engg
HE510
Safe Lifting and Materials Handling
5
Mr. Shaun Grisenthwaite
Safety, Hazards, Risk, Health & Environmental Engg
HE520
Lifting and Slinging
5
Mr. Shaun Grisenthwaite
Safety, Hazards, Risk, Health & Environmental Engg
HE525
Slinging and Safe Working Loads
5
Safety, Hazards, Risk, Health & Environmental Engg
HE530
Safe Lifting Practices
5
Mr. Shaun Grisenthwaite
Safety, Hazards, Risk, Health & Environmental Engg
HE540
Safety in Chemical Laboratory
5
Mr. Dan Menohosen
Safety, Hazards, Risk, Health & Environmental Engg
HE550
Fire Alarm Mock-Up Drill
5
Safety, Hazards, Risk, Health & Environmental Engg
HE560
Hazard of Ammonia Handling, Storage and Shipping
5
Safety, Hazards, Risk, Health & Environmental Engg
HE570
Electrical Safety Management and Troubleshooting
5
Mr. Jon Michaila
Safety, Hazards, Risk, Health & Environmental Engg
HE580
Radiation Hazard
5
Safety, Hazards, Risk, Health & Environmental Engg
HE590
OHSAS 18001 Lead Auditor
5
Safety, Hazards, Risk, Health & Environmental Engg
HE600
SAFETY SUPERVISION: A Safety Training Course for Safety Managers, Supervisors and Officers
5
Dr. Guillermo Leal
Safety, Hazards, Risk, Health & Environmental Engg
HE610
Oil Spill Response Level 2
5
Safety, Hazards, Risk, Health & Environmental Engg
HE620
Industrial Waste Recycling
5
Safety, Hazards, Risk, Health & Environmental Engg
HE630
Lifting Tackle and Crane Inspector
5
Mr. Russell Mason
Safety, Hazards, Risk, Health & Environmental Engg
HE635
Crane Inspection and Operations
5
Safety, Hazards, Risk, Health & Environmental Engg
HE640
Advanced Process Risk Assessment
5
Safety, Hazards, Risk, Health & Environmental Engg
HE650
HSE Excellence Leadership for Supervisors
5
Mr. Keith Balchin
Safety, Hazards, Risk, Health & Environmental Engg
HE660
High Voltage Operational Safety for Engineers and Technicians (OSHA, NFPA & EN Standards)
5
Safety, Hazards, Risk, Health & Environmental Engg
HE670
Incident Controller
5
Safety, Hazards, Risk, Health & Environmental Engg
HE680
Behavioral Safety Management - Expert
5
Safety, Hazards, Risk, Health & Environmental Engg
HE685
Behavioral Safety Audit
5
Safety, Hazards, Risk, Health & Environmental Engg
HE690
Problem Solving Techniques in Safety
5
Safety, Hazards, Risk, Health & Environmental Engg
HE700
Confined Space Safety
5
Mr. Fred Harwell
Safety, Hazards, Risk, Health & Environmental Engg
HE710
Risk Analysis In Food
5
Mr. Izak Labuschagne
Safety, Hazards, Risk, Health & Environmental Engg
HE720
Integrated Pollution Control
5
Safety, Hazards, Risk, Health & Environmental Engg
HE730
Safe Transport of Dangerous Goods by Air and Sea
5
Safety, Hazards, Risk, Health & Environmental Engg
HE740
Safety, Health, Environmental and Qualities (SHEQ)
5
Safety, Hazards, Risk, Health & Environmental Engg
HE745
Industrial Security Principles
5
Safety, Hazards, Risk, Health & Environmental Engg
HE750
Radioactive Protective Supervisor (RPS)
5
Mr. Patrick Garland
Safety, Hazards, Risk, Health & Environmental Engg
HE760
Practical Electrical Hazardous Areas for Engineers and Technicians (Maintenance of Explosive Electrical Equipment)
5
Mr. William Mullany
Safety, Hazards, Risk, Health & Environmental Engg
HE770
Electrical Safety
5
Prof. Emad Ibrahim
Safety, Hazards, Risk, Health & Environmental Engg
HE780
Practical Safe Lifting Practice and Maintenance
5
Mr. Keith Balchin
Safety, Hazards, Risk, Health & Environmental Engg
HE790
Oil Spill Management and Response
5
Mr. Kevin O'Connell
Safety, Hazards, Risk, Health & Environmental Engg
HE795
Crisis Management During Oil Spill
5
Safety, Hazards, Risk, Health & Environmental Engg
HE800
Oily Water Treatment Technology
5
Mr. Barry Winters
Safety, Hazards, Risk, Health & Environmental Engg
HE810
Scaffold Appreciation and Inspection course
5
Dr. Bernhard Farnbauer
Safety, Hazards, Risk, Health & Environmental Engg
HE820
Safe Scaffolding and High Rise Operations
5
Mr. Kevin Miller
Safety, Hazards, Risk, Health & Environmental Engg
HE830
Accident Investigation and Reporting
5
Safety, Hazards, Risk, Health & Environmental Engg
HE835
Accident and Incident Investigation
5
Safety, Hazards, Risk, Health & Environmental Engg
HE840
Supervisory Safety Awareness (Course for Blue-Collar Supervisors)
5
Capt. Valerio De Rossi
Safety, Hazards, Risk, Health & Environmental Engg
HE850
Safety in Industrial Plants
5
Dr. Herman Julsing
Safety, Hazards, Risk, Health & Environmental Engg
HE860
Solid Waste Recycling
5
Dr. Herman Julsing
Safety, Hazards, Risk, Health & Environmental Engg
HE870
Emergency Response Planning
5
Safety, Hazards, Risk, Health & Environmental Engg
HE880
Overview of OSHA Regulations for Process Industry
5
Safety, Hazards, Risk, Health & Environmental Engg
HE890
Mobile Crane Operator Safety Training
5
Safety, Hazards, Risk, Health & Environmental Engg
HE900
The Energy Industries and Environmental Challenge Strategies for Cost Effective Responses
5
Safety, Hazards, Risk, Health & Environmental Engg
HE910
Occupational Health, Safety and Environment (HSE) (Latest Techniques & Modern Technology)
5
Safety, Hazards, Risk, Health & Environmental Engg
HE920
Safety Construction Management
5
Dr. Bernhard Farnbauer
Safety, Hazards, Risk, Health & Environmental Engg
HE930
Diploma in Occupational Health and Safety (NEBOSH)
20
Safety, Hazards, Risk, Health & Environmental Engg
HE940
IRCA Registered EMS Internal Auditor
5
Safety, Hazards, Risk, Health & Environmental Engg
HE950
General Safety in Process Industry
5
Safety, Hazards, Risk, Health & Environmental Engg
HE960
Scaffolding Inspection
5
Safety, Hazards, Risk, Health & Environmental Engg
HE970
First Aid and CPR
2
Safety, Hazards, Risk, Health & Environmental Engg
HE980
National Electrical Safety Code
5
Safety, Hazards, Risk, Health & Environmental Engg
HE985
Fire Fighting in Onshore Oil/Gas Fields
5
Safety, Hazards, Risk, Health & Environmental Engg
HE990
Fire Fighting and Rescue in Power Plants
5
Safety, Hazards, Risk, Health & Environmental Engg
HE995
Fire Fighting and Rescue in Process Plants
5
Safety, Hazards, Risk, Health & Environmental Engg
GE001
Data Analysis Techniques for Engineers, Scientists and Managers
5
Dr. David Sawyer
General Engineering
GE020
Structural Design For Non-Structural Engineers
5
Professor Irvin Luker
General Engineering
GE030
Developing and Revising Engineering Drawings
5
Mr. Bob Wilson
General Engineering
GE050
Blueprint Reading and Graphic Symbols
5
Dr. David Sawyer
General Engineering
GE070
IT for Non IT Managers / Engineers / Executives
5
Dr. James Robertson
